Category Archives: American Prototypes

Micro-Structures and American Prototype Architecture for Z

Miller Engineering released a line of buildings kits years ago called Micro-Structures designed along the lines of typical architecture found in many small American towns. If you visit Main Street in many USA towns the original buildings haven’t changed much since they were built in the late 19th century, the towns themselves have changed dramatically and some buildings have gone through facelifts and demolition here and there, but for the most part the old buildings are intact thus modeling most any era of American railroading is possible with these building kits.

V101- Victorian House: “Empire” (note: additional scoring is required with this kit)

V606- Victorian House: “The Victoria”

The concentration of the line was on Main Street, but it also included a few Victorian houses that rounded out the line nicely. Note: I am using the past tense because unfortunately the line was discontinued with only a few new kits available here and there from dealer old stock. Ebay is a good source as is ZScaleHobo.com. I found a local dealer who had a few left over kits which were very popular in their day and should be today; they are well designed in historical scale and detailing plus well made out of heavy gauge etched brass.

303- K.C.’s Hardware Store (note: features printed windows with store logo) lime sometimes appears over time in mortar joints and bricks, I applied diluted white paint followed by wiping off to give this effect

404- The Triangle Hotel & Bar (note: features printed window masking for the street level windows as well as clear acetate for the other windows) building as it appears right after painting but before window glazing. Typical building type for a mid size town, but this design first appeared in NYC, that building is called not surprisingly the “Flat Iron Building”

505- Crestline Theater (note: two options for marquee include a solid marquee with etched movie now showing or a cut out marquee designed to hold a paper now showing sign, this building was built with solid marquee) detailing is so good with this kit that a depiction of can lights above the doors is included that look great lit

With a few exceptions the kits go together quite easily, but I found the large Victorian “Empire” House to have shallow scoring lines for bending in this case further scoring was required. Overall the Empire house was the most difficult of the group to make.

606- Pitman’s Deli (note: excellent detailing with printed store windows and beautiful awning, plus recessed door)

I found some kits came with acetate for the windows while others did not, and a couple had just enough for street side windows with very nice printed signage.

901- City Fire Station (note: I tried building this kit years ago with the recommended Super Glue, it was a disaster and tried these kits again until this Fall. Solder is the way to go for me!)

One obvious advantage with these kits is lighting, they will not leak light as the metal is opaque, but you must fashion windows masks or partition walls for realistic effects.

801- Townhouse #2 (note: under construction the model is assembled but prepping it for painting will include sanding solder joint smooth and bending to make the building sit flush, followed by a good cleaning with diluted Dawn, warm water and a soft toothbrush, green residue on building is flux which washes off easily with warm water and original blue Dawn)

Prepping the kits for assembly takes time, any rough edges must be sanded or filed. And after assembly the buildings need thorough cleaning to remove solder flux or other debris. Super Glue or soldering are the choices for assembly, but I prefer soldering due to the speed and control of this method. Soldering is easy if you use flux in addition to the solder with flux. I solder at 750 degrees and place water soluble flux at the area to be soldered with a toothpick. Note: solder melts and follows the source of heat, try to avoid applying solder directly to the soldering iron tip.

100- City Scoop (note: this is the only kit that requires Super Gluing, it is made of stainless steel and solder will not adhere) this building features great detailing including ice cream machines and work table on the interior, plus picnic tables, air conditioning unit and trash cans on the exterior. I had fun with this kit and painted a whimsical ice cream cone. I also left the interior natural stainless steel, but I painted the ice cream machines with silver solvent based paint and painted the outer edge of the ice cream cone with metallic copper solvent based paint just to catch a sparkle there. (note: if you discover a build-up of Super Glue after its cured it can be removed easily with a razor blade and wear gloves working with Super Glue!!!!!!!!!!)

Note: preparation of the building will include sanding or filing smooth any solder ridges or residual glue that will otherwise show up under a thin layer of paint.

Window glazing is glued in place after painting with 5 minute epoxy. As stated earlier acetate was missing in some kits I bought or not enough was included, if you build Archistories kits use some of the leftover acetate as they are very generous at Archistories.

5 minute epoxy might be the best option for securing these buildings to the layout if it is portable otherwise they sit flush to the surface and anchoring may not be required.

The small buildings in this line-up require simply cementing window details in place then folding buildings sections together and cementing. The roof requires bending along sides and molding embellishments before attaching to building. Note: fold the front section of roof first before side sections, a separate folded section goes over the front of the roof thereby giving a nice finishing touch thus do not cement the roof until this part goes on! Note: everything is outlined well in the instructions, my notes are simply to highlight important aspects that arose for me.

These buildings look better in person, and even better with a GG1 rolling by capping off the hard work and meticulous attention to detail involved with their construction. And your family will be proud of your good fortune!

No complaints about these kits, they were fun to build and modify as needed!!! And soon to be very collectible!

Siding: essential brass bending tool is “The Bug”

Blast from the Past: Marklin 88035 “Bumble Bee”

If you are an American railroader the “Bumble Bee” loco may already be in your collection, it has been released in many versions and many scales by numerous manufacturers. In 2004 Marklin released their “Bumble Bee” loco and tender for the mini-club line-up, it was cast in brass with metal tender. This “One Time Series” featured fine detailing and add-on parts with non working headlamp.

Founded in 1870 the Denver and Rio Grande Western Railroad (D&RGW) was originally a narrow gauge railway who’s motto was “Through the mountains, not around them.” The history of this railroad spans more than a hundred years from its founding as a coal and mineral narrow gauge mountain railway, in 1988 it merged with the Southern Pacific.

The Louisiana & Nashville Railroad built the first 2-6-0 locomotive of this type in 1864, it was a record setter due to it being the largest locomotive in America at that time. The Marklin 88035 could be said to be modeled on a later version with independent front bogie. Service span for this locomotive type was 1860-1910. Operating number for the Marklin “Bumble Bee” is 136. Baldwin Locomotive Works built the narrow gauge 2-6-0 locomotive for D&RGW 1881-1902.

Note to collectors: Marklin’s 88035 is sought after by Z gaugers but also N scalers due to its slightly larger size. 88035 is the first and only mini-club locomotive modeled slightly bigger than scale. Produced as a One Time Series in 2004 it quickly sold out, today it is high on the list of sought after secondary market locomotives. Pricing for this loco range from $500-$1000 (new/mint), but before you buy consider condition as a big part of the price, average used ones in working condition and 80% cosmetic condition should be in the $250-$350 range. Very careful buying trains online without seeing them in person unless you are dealing with a reliable seller or store. Reynauld’s in IL,  ZTrackResale and Z Scale Hobo are recommended sources for secondary market.

Note: to go with this fine loco is the 4 car coach set lettered for D&RGW: Marklin 87910.

Good Luck and Have Fun!

Siding: The Railroad Museum of Pennsylvania in Strasburg, PA owns a Baldwin 2-6-0 locomotive for their collection. One of the finest collections of American railroad equipment can be found in this museum: http://www.rrmuseumpa.org/

Trains are Trains – Marklin Models of Trains are something different and greatly so!

Marklin 88855: BR 03 Express Locomotive of the DB

A subtle thought occurred to me the other day, I was thinking about my last post on Scandinavian snowplow locos of the SJ in Sweden while having a brief moment of reflection during work as a photographer of architecture and interior design. My Wife and I work together so moments of repose sometimes happen during brief interludes moving equipment from the shot just taken to the next.

Marklin 88063: Serie 232 TC of the SNCF

I am very impressed with the offerings of Marklin and their z gauge line in the last five years, the following is a brief post and interlude in the normal technical and historical postings thus far presented at ZTrainsWeekly. This post is dedicated to the type of collector I have met on many occasions hanging out in train stores across the country, train meets and clubs, those that have taken on collecting expensive tiny trains because holding them in their hands and marveling at their striking detail and charm make them happy.

Marklin 88833: Serie 150 Y of the SNCF

So what does a Z gauge railroad loco or rolling stock have in common with the prototype railroad equipment of a particular railroad. First they are in a scale of 1:220 so every 1 inch translates to 220 inches in prototypical scale thus accurately reduced by Marklin in length, height and width dimensions. Graphics and lettering are correctly rendered by Marklin fitting accurately in historic timeframe. Detailing of trucks and equipment appear to show few differences with the prototype. Working headlamps and running lights are sometimes designed into the model and for some vary little with the prototype. But if we start with the prototype and compare it to the Z railroad model of Marklin few similarities can exist including actual equipment operation those being sanders, air brakes, working engines and the like. I hope I haven’t lost the interest of my readers, I am close to making this posting worth while if you have been queried by those that have yet to be bitten by the railroading hobby.

Marklin 88134: BR 132 of the DR

The model can only be a version of the prototype, but an impression of the prototype is far better than real diesel model locos running on diesel fuel throughout your house killing your houseplants and annoying your wife or steam and arcing electric ones. The comparison between the prototype and the model resides in the idea that the prototype surfaces on the rails in front of us and embodies history, design and awe whereas the model railroad elicits its connection to the prototype but also triggers our imagination thus connecting us to the models in serious and creative ways. All model railroad collectors are connected in this way, we can study the history of the prototype and marvel at its representation as a model as something else thus collecting the miniature is our railroading connection not limited but expansive.

Marklin 88106: BR 05 of the DRG and Marklin 88075: Class J-2 of NYC

Models of trains and their prototypes were built side by side since railroads began in the 19th century, Marklin was the first to successfully manufacturer commercially available miniature trains. Cheers to Marklin and another 158 years of outstanding trains!

An Introduction to Marklin Z American prototypes and rare small batch imprints

Marklin has brought to life American railroading prototypes in small measure if one compares the total entries of European ones: lot’s of F7’s, Mikado’s and GG1’s along with respective rolling stock. The eras portrayed are mid century primarily with a few earlier exceptions. Micro Trains is stronger in the field of American prototypes with their exhaustive survey of various rolling stock each boxed with a well researched and charted description. American prototypes are not a strong category for Marklin Z, but when they release something new like the GG1 it is a superlative example. And the F7 sets or individual ‘A’ units are widely collected in their infinite variety. But one type of a rolling stock example in each category makes life a bit challenging if you collect exclusively Marklin, and you are serious about railroading. Some collectors have opted for trading out couplers so MicroTrains rolling stock and locos can be used with Marklin and vice versa. It is a good trade off, but those of us lucky enough to own the Commodore Vanderbilt are still stuck without a coach set. Other manufacturers are on the scene producing high quality models including but not limited to AZL, and their current collaboration with Marklin  in the production of three variations of the E8 maybe the first of more collaborations, who knows?

If you are a tried and true collector of Marklin Z American models like me you may already know about the small batch special imprint rolling stock. In coming months I will be including examples of these rare offerings that little information has thus far been known. Hopefully with the help of others in this field of collecting I can shed more light on this topic until then stay tuned and happy railroading!