Category Archives: Limited and rare

Repainting 8135 coaches for the SJ: Part 3

This is the 3rd and final post on the repainting and lettering of the Marklin Dompfeil train set (8135) for the SJ.

Before (Marklin 8135):

After (SJ coaches using FR decal set):

At the start of this project I had never repainted a train car before or operated an airbrush thus much was learned.

SJ coaches in z scale have been extremely limited, FR released a type litt AB8k 1st and 2nd class in a single release of 30 only, FR 46.299.00 was based on a German built coach that was used on a ferry service. In order to accurately represent this coach FR modified a Marklin coach that was shortened by one window.

photo: FR 46.299.00 (edition: 30 total) – SJ type litt AB8k 1st and 2nd class coach

For those interested in SJ modeling in z there are numerous locos and freight cars by FR, but scant few passenger coaches until FR released a decal set several years ago intended for the Marklin 8135 coaches, these German built coaches for the Dompfeil train set were likewise used on the SJ.

The process of producing a set of 4 coaches started with disassembly of the coaches followed by stripping, in this post the final stages are documented including masking, painting, and lettering.

Identifying the sections to paint include the undercarriage, sides, and roof. The roof is a clip on part, it does not require masking unlike the shells. Painting two colors of the same part requires masking, I decided to start with the undercarriage and vestibules color, I sprayed the entire shells with this color with no masking.

Before applying the brown paint I masked off the vestibules and undercarriage. The masking material is similar to common masking tape, but it is markedly thinner with a slick surface, it also comes in a variety of widths. I chose masking tape of 6mm width manufactured by Tamiya.

After paint is dried the masking tape is removed, for areas not protected by masking retouching maybe required, I chose to paint the buffers with a brush as the final stage of painting, masking these seemed an impossible task and fine brush work produced great results.

The FR decals in the set are applied by rubbing onto the cars, they differ from other decals that are applied with water. The decals provided had alignment marks to make positioning easy, my burnishing tool was an artists’ burnishing bone, but a soft tipped lead pencil should work fine.

After decals are applied a final coat of clear lacquer is sprayed on to protect the finish and decals. And reassembly follows as the last step.

Notes on airbrushing: I purchased an Iwata Neo airbrush with an Iwata braided hose for just over $100. Several airbrush air compressors were available from the store I purchased the airbrush from with prices ranging in the $220-$300 range, I chose to use a Porter Cable pancake compressor I use for air tools. A fitting is available to connect the braided airbrush hose to this type of compressor for a few bucks. The only difference between an air tool compressor and a specialty airbrush compressor is one of noise, the airbrush compressor is very quiet while hearing protection is required with the pancake compressor. PSI (pressure per square inch) is a determined by testing on a piece of paper, I set the compressor gauge to 20 PSI which worked perfectly, others I researched recommend 15-20 PSI. Air brushes require cleaning after painting, cleaners are available or water can be used for acrylic paints. When the spray is clear the nozzle is clean, other parts should be cleaned as well. A cleaner between paint colors is also required.

Notes on paint: the consistency of paint should be the same as skim milk, most paints may require thinning with water to gain this consistency. I used Testors acrylic paints that I mixed to customize the color, they are railroad based colors that did not require any thinning. The clear coat I used is made by Iwata, it was the consistency of white glue and required thinning to spray. Acrylic paints dry quickly and can be layered on layer without skinning as can be the case with enamels or the combination of the two. The very best results will be achieved with 100% acrylic paints. Careful attention should be applied in mixing paints for airbrushing, straining maybe required to avoid clogs and poor paint results. For safety use a mask and gloves.

Notes on applying decals: as with much detail work careful consideration applies to attaching decals, they are transferred from a sheet to the model with burnishing tools. Best results are achieved with a level flat object, I use a specialty artists’ burnishing bone. Pointy tools will not work! Acrylic paints should be allowed to dry overnight to provide a hard surface for decal work. And very delicate handling until final spray coat of lacquer. I used clear lacquer with a satin finish which is consistent with Marklin’s coach finishes.

For close to two years I had the decal set and a second Marklin 8135 for this project, but I was reluctant to start due to lack of expertise. Plus I was apprehensive to strip the paint of mint Marklin coaches: after stripping there was no going back. I discovered that air brushing is easier than I thought producing a superior paint finish. Now I feel the airbrush is as important to the railroader as the soldering iron. Future uses for this new tool include weathering track, cars and locos.

Good luck and have fun!

Siding: FR’s Ra 987 electric locomotive is a compatible loco for this coach set, it is based on the prototype from the mid 1950’s:  FR 46.132.01 was produced in a limited series of 32 total, it is still available from quality-toys-trains on Ebay.

 

Marklin 88893: BR 10 with experimental paint scheme

The rarest of the BR 10’s in ‘Z’ is the 88893, it was only available from the mini-club Center upon release. This One Time Series from 2004 features the experimental paint scheme proposed by Krauss-Maffei, they also proposed a unique angled smoke deflector with large proportions. This was another paint scheme that was not adapted for the new DB BR 10 instead black was the chosen color. The 88893 was released in an attractive wood box, it features a 5 pole motor.

Siding: one of Marklin’s Era III DB coach sets will complement this loco and look great to boot!

Marklin 88892: BR 10 Experimental Paint Scheme

A special cast gold BR 10 was released as the 3rd of this loco class in 1997 as item number 88891, in 3 years the 4th BR 10 would be released as 88892. The Era III 88892 was a One Time Series for the MHI Program in an experimental paint scheme, various designs were floated before indecision landed on the black paint scheme represented as 8889. The attractive blue with white pinstripe would have been a stunner in the late 1950’s representing a new loco with “forward progress” suggested by the innovative design, but this and other paint schemes were shelved when a consensus of opinion could not be reached. Model originally delivered in an attractive wood box.

Siding: all BR 10’s are Era III, it was a short lived locomotive type with just two prototypes, Marklin released 5 models of this loco but only one was based on the prototype, the others included a special Marklin cast gold model and 3 experimental paint schemes that were proposals only.

Marklin 8888: BR 10 Steam Locomotive

The first BR 10 loco was released in 1994 as a One Time Series for the MHI Program: product number 8888. Sporting a very attractive paint scheme the 8888 was delivered in blue and gray with bright red wheel spokes and matching tender trucks. A heavy cast metal shell with operating number 10 001 for the DB. Design and styling seems to scream Era III in the age of streamlining as a emblem of progress and modern aesthetics. The model produced by Marklin is a very good runner with plenty of weight to maximize the pulling potential of 4-5 coaches easily.

photos: 8888

Repainting Marklin 8135 coaches for the SJ: Part 2

Part 2 is completed: stripping the old and prepping for the new. Marklin’s 8135 Dompfeil set is the subject of the repaint and older SJ coaches will be the end result.

I am using the FR label kit for the repaint which includes dry transfer lettering, lettering will take place in Part 4.

Following Part 1 which was disassembly this post concerns stripping paint from plastic train shells. The stripper is 91% isopropyl alcohol available from any drugstore, its cost for this project $4.00.

I first placed all parts to be stripped (4 coach shells and 1 roof panel) in a small plastic dish and submerged them in the alcohol. In about 1 hour the paint appeared to be softening on the shells. Using a toothbrush I applied little pressure to remove the paint and decals, it would take numerous attempts with time in between to remove the finish, but it eventually started coming off with the toothbrush. The roof which was yellow in the original set was much more difficult to strip, it required an overnight soak in the alcohol. The silver painted roof panels I did not strip these I will simply spray over, I stripped the warm white panel due to the thickness of the paint which was heavier than the silver paint.

Note: use of eyewear and gloves is highly recommended. The fumes from the alcohol is very strong thus a well ventilated work area is best, take frequent breaks to avoid breathing in too many fumes, the plastic parts are not affected by the alcohol, they will not melt.

For paint that was in small crevices or around roof details I made use of a toothpick, soaked in alcohol, it worked well to dislodge hard to get at paint.

Following the stripping I washed each part in mild Dawn dish washing liquid and rinsed well.

After inspecting each dry part I repeated the stripping to remove paint on some of the window frames.

photo: before

photo: after

The next step is painting which will include constructing a spray booth out of cardboard box, matching paint chip FR included in kit, and constructing armature to hold the parts for painting.

Siding: the Dompfeil coaches are the same ones made in Germany for the SJ, they featured aluminum roof panels: early ones were painted gray and the late ones were shiny silver. For these coaches I am modeling the earlier ones to be pulled by an Ra 987 Express locomotive.

photo: FR – 46.132.01 – Statens Jarnvagar SJ (Swedish State Railways) Serie Ra 987 Express locomotive. Limited Release of 32 locos total.

Repainting Marklin 8135 for the SJ!!!!!!!!!!!!!: Part 1

photo: FR 46.130.31 – RC-2 locomotive for SJ

Marklin has paid little attention to Scandinavian Railroads in z gauge. There have been releases such as the 4 MY locos (brilliant series!!!!) and a few interesting freight cars, but never has there been attention paid to Sweden, this country’s railroads are left up to the never ending achievements of Harald Freudenreich at FR.

photo: FR 46.816.01 – Kis 950 sliding roof car for steel slab transport on SJ

Marklin has covered the SJ railway in HO only while FR has devoted much of their time in recent memory to SJ and other Scandinavian railroads. FR offers some Swiss, German and Austrian items currently, but Harald’s devoted fans come to him for Scandinavian trains.

photo: FR 46.132.01 – Ra 987 Express Locomotive of the SJ

Some of the most interesting railroads in the World are located in some of the most interesting natural wonders in the World. Light, geography, and climate combine to create the beautiful Scandinavian landscape, but for trains it is challenging, cargo has to be protected from a rather brutal climate with some box cars lined with heavy insulation to protect from permafrost and autos transported in closed boxes. More on this topic at a later date.

photo: FR 47.812.00 – insulated box car for the NSB

The topic today is a project I have been interested in starting for awhile now, it is the repaint of Marklin 8135 coaches for the SJ Railway. Although FR has paid much attention to freight rolling stock, they have not released coaches for the SJ as of this date with one exception. An announcement was made earlier in the year that coach sets are coming to market later this year, but in the meantime I am making my own custom set using dry stencils provided by FR a couple of years ago. The exception was a proposed project of many years that was finally released last year, it was a Marklin coach modified for SJ. The prototype was based on German built coaches used in ferry service in Sweden.  In order to model the prototype FR repainted and stenciled the coach after cutting the shell to remove a window thus shortening the coach. I own this coach and the craftsmanship is flawless.

photo: FR 46.299.00 – type litt AB8k 1st and 2nd class coach for ferry service to Germany. The top coach is the modified Marklin for SJ by FR, and the bottom coach is the original standard coach by Marklin.

Why refinish the 8135 coaches and not another set of coaches? Good question! Set 8135 was released in 1991 and included coaches built in Germany that were also used on the SJ. The historical perspective was provided by FR who also provided the stencil kit for relettering the coaches and a paint chip for the correct shade of reddish brown used by SJ. Painting and other details will be discussed in Part 2 and 3 respectively.

photo: deluxe box train set “Dompfeil” of the DB

The first installment of this project is disassembly of the coaches. It is okay to be a little nervous disassembling Marklin coaches, but all things Marklin are built to take apart, each part is snapped or clipped together without glue. Repainting projects in Marklin Z are not necessarily recommended by this railroader, they potentially will diminish the collectible value, but in my case I own two 8135 sets which I like very much, turning the second set into SJ coaches is a bit necessary since I collect SJ locos built for express service.

On with the project! First step is identifying the set for repaint, in this case the historical background was already researched by FR. The set for repaint is Marklin 8135 released with a BR 03 express loco in a deep blue paint scheme. The set was released in 1991 with three 2nd class coaches and one DRG dining car. This was a deluxe boxed set presented in a high gloss illustrated carton. The running performance of this loco is superb, and it looks great to boot!

photo: 8135 locomotive and tender – BR 03

photo: 3 coaches disassembled with their respective parts including shell, trucks, weight, roof, and window glazing.

Step 2 includes the removal of the roof which is easily accomplished by very carefully pulling it off, the roof is clipped on and starting from one end seems to be the way to do this successfully.

Step 3 involves the removal of each car’s pair of trucks, carefully swivel each truck to the side for leverage and using a small screwdriver gently pry the truck off by moving back and forth around the pivot point, it will snap off. Note: torquing as seen in the photo is necessary for removal of trucks, but please use care.

Step 4 using a small pair of tweezers and starting at one end gently loosen the window glazing held in place with prongs in the base of the coach. Take note of the indents that line up with the roof clips for reassembly later.

Step 5 is removal of the weights. Using a small screwdriver remove the plastic heat points holding the weights down, weights will lift off easily from the posts in the bottom of shell.

This is one of those projects that allows a railroader to tinker with their hobby.

Good Luck and Have Fun!

Siding: this set contains parts that are snapped or clipped in place, but older coaches used glue to cement the window glazing, in the case of older coaches window glazing will more than likely pop out with gently wriggling. Reassembly of early windows is accomplished with 5 minute epoxy only, other glues use solvents that might melt plastic. NEVER use a soldering iron in and around enclosed plastic parts, micro soldering irons should only be used on heat points to attach shell to frame and coupler housings with caution!

German BR 10 Express Locomotive: 5 variations in Z!

A rather short lived and limited steam locomotive is none other than Germany’s BR 10 express locomotive of the DB, only 2 were made in 1957. They were seen as the replacement for the Class 01, but lack of locally sourced parts sidelined the elegant steam locomotive to the car shops thereby cementing a wrongly held belief that they were unreliable.

Nicknamed “Black Swans” because of their elegant appearance the BR 10’s were in service for just 11 years. Streamlining was practiced for many years in designs of steam locos, but the BR 10’s seemed to be a further refinement of this technology, instead of reducing wind resistance by sheathing a steam locomotive as was the tradition, the BR 10’s were shaped to direct the airflow in and around the locomotive while at the same time giving easy access to the running gear for daily maintenance. Cylinders could be accessed by hinged door in streamlining.

Two 4-6-2 BR 10’s were manufactured by Krupp with oil fired tenders that would replace traditional firing thereby reducing the fireman’s work by 30%.

The top speed of this locomotive class was nearly 100 miles/hour which was enough speed for express service and their time schedules, but their 22 ton axle weight limited their use to certain mainlines only.

The class 10 001 is a preserved locomotive at the railway museum Deustche Dampflokmuseum in Neuenmarkt-Wirsberg.

Marklin produced 5 variations of the BR 10 for Z including two in experimental colors and one 18 carat gold special version (88891). All locomotives with the exception of 88891 were given operating number BR 10 001.

In 1955 various color scheme proposals were submitted to highlight the new German Federal Railroad’s flagship locomotive, but it appears black with white pinstripe was the chosen color scheme.

8888 (photo) One Time Series 1994 for MHI program with blue and gray color scheme.

8889 (photo) BR 10 with black and white pinstripe was produced 1994-2008. Early examples will include the original 3 pole motors and later models have the new 5 pole. Operating number 10 001.

88891 (no photo) BR 10 commemorative model to celebrate “25 Jahre mini-club”. Loco and tender were produced in 25 carat gold. This One Time Series from 1997 included white gloves and a signed certificate.

88892 (photo) BR 10 produced in celebration of 10th anniversary of MHI program. Stunning experimental paint scheme in blue with pinstripe. Produced as a One Time Series in 2000. Originally available from MHI dealers only. Delivered in wood box.

88893 (photo) BR 10 in experimental paint scheme by Krauss-Maffei, they proposed this design August 4, 1955 and referenced the study as TLO 54801. The smoke deflectors were unique to this design, tear drop shape was to accentuate the forward thrust of the locomotive. The resolution meeting at the end of 1955 was unable to approve this design. Limited Release 2004 available at mini-club Center only. A stunning example of a locomotive that if produced would have broken new ground in steam locomotive design. Delivered in wood box.

Beyond color variations no differences appear in the four pictured locomotives with the exception of specialized smoke deflectors in the 88893. Under the hood late production 8889, 88892 and 88893 included the updated 5 pole motor.

Adding streamlined locomotives to a layout will portray the transitional period of the late 1950’s in Germany with all types of locos sharing the rails including traditional steam class 01’s, diesel and electric.

Good Luck and Have Fun!

Siding: this robust locomotive type is a strong runner with excellent pulling power due to its heavy weight. Even distribution of weight makes this an unlikely candidate to poop out in a turn-out at low speed. Derailments are equally unheard of with this fine mini-club locomotive.

Siding: Marklin 5 pole motor upgrade is possible for the 8888 and 8889 with part number E211911. Basic soldering techniques are required for this repair.

 

 

New Releases: Archistories “Signal Towers” + Marklin tank loco 88957

The perfect companion for Archistories buildings along the rails is Marklin and vice versa. Three new releases by these two companies plus one more Archistories will be the gist of this post.

Both companies of German origin go hand in hand, Archistories reaching back in time with their early Prussian design brick industrial buildings which service the railway and Marklin’s wide range of Era 2-6 locos and rolling stock. A new release by one of these companies builds on the tradition of what has been released thus far.

For Archistories two new signal towers one of brick and the other framework construction complement another interlocking tower with exposed timber released a few years back.

Variations in their kits include thus far have included framework versus brick as was the case with the mill building which can be seen here along side the new release signal tower of exposed timber/framework construction. Framework construction can be seen in Germany in a variety of uses including residential. Adding several different building types in exposed timber versus brick makes for a very interesting landscape.

Notice the mill propped by tweezers to level it out for the photo, the wheel extends below grade and it is serviced by a small motor provided in the kit. Simply soldering is required to attach two diodes in-line to the positive pole, wires thus descend below the structure and will thus be hidden from view after the building is planted in your layout’s landscape. The first step to making the mill is the wheel which is the more involved than the rest of the kit, but it is fun to start here knowing that by the end of the day that wheel will be turning wheat berry into flour for your town’s sustenance. The motor provided in the kit is shaped to perfectly conform to the buildings framework, but before proceeding you will want to confirm the motor is functioning properly just to be sure, it is highly unlikely to have a motor defect in an Archistories kit. The manufacturer suggested to me that a couple of more diodes can be installed to reduce the sound of the motor, I am a okay with the movement and sound, I don’t feel additional modification is warranted. Special Note: diodes should never be covered by electrical tape due to the potential of overheating, leave them naked so to speak!

Finding a home on the layout will require a mill race with partially dammed water to create pressure, one door is provided to the bridge that could provide access to a parking area for a truck or wagon. A Preiser figure or two will sure add scale and built into each Archistories kit are partition walls to carefully control light flow inside the mill.

If you have ever wondered what a signal tower looked like way back in the day Archistories has provided us with three examples including the two mentioned in this post. When signal towers had a purpose they housed throw levers made of brass that skilled operators would throw and pull to control semaphores and track switches. In the United States switch towers can be seen variously within large switch yards but the throw switches have been replaced with electronic push buttons. And for that matter modern control can be carried out miles away. Signal towers in the United States were so well built as was other rail infrastructure that many abandoned years ago still stand today.

Archistories has modeled their signal towers/interlocking towers with many throw levers, and they have provided large windows for good visibility, the name of the game is coordination and visibility, railways could not sustain frequent accidents or misaligned trains thus the operator of signals and switches provided a very important contribution to safe and efficient rail service.

Marklin’s new tank loco is a member of the elite new and improved steam loco design for Mini-club that includes partially new tooling including the active side rods whose movement is a lively and graceful dance, new tooling includes detailed running gear and brakes. To not mention the extensive and crisp painting and printing would be an oversight since the level of detail probably extends further than we can see, but it is reassuring that Marklin still goes further than we might require to bring the model closer to the prototype. This one being the KPEV class T12 tank locomotive with “Berlin” destination board and used in suburban traffic. Marklin 88957 is an MHI Exclusive, collectors will need to contact an MHI dealer to order this one. The Marklin Handlers Initiative constitutes those dealers who order everything Marklin produces thus guaranteeing availability of certain releases other dealers may not have access to. Having a relationship with an MHI dealer who also handles your Insider subscription will guarantee your collection grows with some of the rarer releases.

Recommended: Noch 61104 laser-cut adhesive features pin point accuracy when applying glue in small drops for laser-cut cardstock building construction: faster than applying glue with a pin or toothpick!

Good luck and happy railroading!

Blast from the Past: Marklin 88035 “Bumble Bee”

If you are an American railroader the “Bumble Bee” loco may already be in your collection, it has been released in many versions and many scales by numerous manufacturers. In 2004 Marklin released their “Bumble Bee” loco and tender for the mini-club line-up, it was cast in brass with metal tender. This “One Time Series” featured fine detailing and add-on parts with non working headlamp.

Founded in 1870 the Denver and Rio Grande Western Railroad (D&RGW) was originally a narrow gauge railway who’s motto was “Through the mountains, not around them.” The history of this railroad spans more than a hundred years from its founding as a coal and mineral narrow gauge mountain railway, in 1988 it merged with the Southern Pacific.

The Louisiana & Nashville Railroad built the first 2-6-0 locomotive of this type in 1864, it was a record setter due to it being the largest locomotive in America at that time. The Marklin 88035 could be said to be modeled on a later version with independent front bogie. Service span for this locomotive type was 1860-1910. Operating number for the Marklin “Bumble Bee” is 136. Baldwin Locomotive Works built the narrow gauge 2-6-0 locomotive for D&RGW 1881-1902.

Note to collectors: Marklin’s 88035 is sought after by Z gaugers but also N scalers due to its slightly larger size. 88035 is the first and only mini-club locomotive modeled slightly bigger than scale. Produced as a One Time Series in 2004 it quickly sold out, today it is high on the list of sought after secondary market locomotives. Pricing for this loco range from $500-$1000 (new/mint), but before you buy consider condition as a big part of the price, average used ones in working condition and 80% cosmetic condition should be in the $250-$350 range. Very careful buying trains online without seeing them in person unless you are dealing with a reliable seller or store. Reynauld’s in IL,  ZTrackResale and Z Scale Hobo are recommended sources for secondary market.

Note: to go with this fine loco is the 4 car coach set lettered for D&RGW: Marklin 87910.

Good Luck and Have Fun!

Siding: The Railroad Museum of Pennsylvania in Strasburg, PA owns a Baldwin 2-6-0 locomotive for their collection. One of the finest collections of American railroad equipment can be found in this museum: http://www.rrmuseumpa.org/

Marklin Z: One of the Last Great Collectibles!

Photo: Insider Model 2012: 88010 – BR 001 for DB (no longer available)

Are we collecting or are we acquiring: that is the question. When Marklin Z comes into a collection a bit of railroad history is preserved and a commitment is made by this generation to future generations that hold that Marklin’s history and the greater history of railroading is worth preserving.

Photo: Special Imprint (SMI) 88820: “Swiss Cheese” class Am 4/4 pictured with type Hbis freight car also featuring “Swiss Cheese” paint scheme. (no longer available)

Marklin Z gauge is one of the last great collectibles, it will persevere well into the future, and what has been released thus far since 1972 are limited and rare. Rarity is well liked by collectors of all types, but collecting Marklin mini-club (Z) is truly unique from all other collectibles due to their leadership and innovation in z gauge. There are other companies some small and some large producing z gauge products but Marklin is linked to z gauge by the very fact they invented it in 1972, they continue that history today with innovations including true catenary operation through roof equipped pantographs on their electric locos, realistic working side rods on the steam engines, and numerous diesel loco types including the Russian Ludmillas.

Photo: Export Model for France 2003: 88063 – Reihe 232 TC (no longer available)

Many collected “toys” (only time this word will be used on this blog because railroading is serious business! I’m kidding its loads of fun too!!!) these days are secondary market items from long defunct and beloved companies such as Buddy L from the 20’s. It is exciting to dig around a find some rare item that has not been made for 80-100 years or more, but with Marklin anyone can jump in and start collecting from a company in business since 1859. Buy a mini-club loco today and within a year or two or even a few months it will be out of production and already a collectible. Keeping the condition of your new train pristine is part and parcel to collecting anything, but with Marklin this extends to keeping the box in good condition. Want to run a train on a layout simply select the railroad you want to model and keep the other fine locos and rolling stock on display, displaying is just as much fun as driving those trains.

Photo: Marklin Magazin Edition 88953: BR 74 with lettering and Prussian Blue paint scheme for Marklin Magazin (still in production). Note: 1st locomotive release for the “Marklin Magazin” editions.

For collectors Marklin Z new releases are limited and rare falling into several categories: MHI Releases, Special Imprinted Editions, Export Models, Insider Models, Museum Editions, Marklin Magazine Editions, and general releases. Marklin Handlers Initiative includes releases only available to dealers that subscribe to the MHI program, this subscription includes ordering everything Marklin releases, MHI’s are One Time Series. Export Models are limited to distribution in the given country the release represents thus Swiss Export Models are distributed to Swiss dealers in a One Time Series. Insider Models are available only to Insider Members who maintain year long membership in the insider Club for about $100/ year with many benefits. Museum Editions are car sets inspired by companies with ties to Goppingen, Germany the home of Marklin’s headquarters. Usually housed in a specially printed tin box museum editions include a freight car and sometimes a cast metal truck or van. Marklin Magazin Editions are distributed in the United States by Walthers, these One Time Series freight cars usually depict a new car type, they are always painted Prussian Blue with Marklin Magazin insignia, and sometimes the car designs are inspired by the magazine’s printing production including one car that included a load of reams of printing paper. General Releases are those cars and locos that are announced by Marklin and commonly distributed throughout the world, but aside from the perception of wide distribution these items are still very limited and rare with popular releases selling out fast. Of the categories so described Special Imprints and Export Models are the most difficult to collect with secondary market dealers being the only source for these with the exception of direct purchase from German dealers including those with listings on Ebay.

Photo: Marklin MHI release (2016) 88216: BR 212 (diesel) for DB AG (out of production: still available)

Photo: Marklin regular release (2013) 88998: BR 38 Era III (former Prussian P8) passenger loco with tub style tender (no longer available). Note: BR 38’s have been in the Marklin mini-club program for years including trainsets, but the 88998 was the first generation of this loco type with highly detailed side rods and running equipment. This is one of favorite mini-club locos, it is a real pleasure to watch pulling Prussian coaches its action on the rails is melodic.

Part of the fun of collecting Marklin Z is rarity, this singular aspect of this hobby is underscored by small productions of one time series in multiple categories: Marklin Z the readymade collectible!