Bahnhof Hamburg Dammtor: opened July 7, 1903

If you are up for an ambitious project in ‘Z’ this is it: 89792 and 89793 building kits for the Hamburg Dammtor Train Station. Two kits sold separately to comprise the station building and approach including arcades and bridges.

The cost for the kits is very reasonable considering the scope of these kits and the accurate translation of the prototypical building: discounted retail for 89792 is $249, and 89793 is $149. Both kits are made of laser cut card stock which has been a growing trend in building kits partly due to the material itself, laser cut buildings look great and their matte and pre-colored surfaces contrast nicely on a layout. In ‘Z’ or any other scale these are big kits measuring nearly 55 inches long, and in ‘Z’ there are lots of small parts to assemble.

Finished dimensions: 20 7/8 x 8 1/4 x 4 5/16 inches (89792) and 33 1/2 x 6 x 1 3/16 inches (89793). Both kits are card stock with one small exception, the station includes 4 caps and spires on the entry towers that are cast resin and painted to match the rest of the kit.

Marklin commissioned MKB Modelle for these build kits. As of writing this post I have not started assembling these kits, I am hesitant to build them until I design a layout for them first. A layout to include these kits can be historical based on the 1903 opening of the station or contemporary with the arcades and bridges,  it can also be prototypical rendering or an interpretation. Current urban planning for the Hamburg Dammtor Station includes numerous intersecting roads with few adjacent buildings, modeling some or all of these roads will be a challenging undertaking for the most ambitious.

Four lines run through this station so the track planning is another consideration. Nearly 5 feet from end to end for both assembled kits, and if it is incorporated into a loop the dimensions will balloon to 7-8 feet, this is after all probably the most ambitious project to date in ‘Z’ with an estimated build time of 50 hours for 89792 alone.  Reviewing the part sheets and instructions these kits look well organized, and the instructions are clear. Heavy card stock, medium weight card stock and lightweight card stock are all used in these kits. The kits start from a rigid foundation and build up and out, in some cases with as many as 5 layers to build the exterior walls. No covering for the platform or track concourse is included, you will need to come up with your own solution, I highly recommend Faller material here available in the United States from ZScaleHobo.com (updates will follow for my own solutions here). Accessorizing and laying track in the station will be much easier or only possible before installing the trusses. Partial exposure of the interior might be interesting by reducing the roof sheathing and maybe consider leaving the roof un-cemented in case you need to access the interior in the future.  I have recommended a UHU Glue for attaching window glazing in the past, for this kit I would recommend the standard assembly glue: all-purpose, wood, or polyvinyl acetate, but each will require the added step of roughing up the acetate in the area to be glued. Another consideration is a very level work surface, even though the parts snap together assembling the building on a very level surface will insure there will be no warp or curve to the base, I recommend a piece of masonite for a smooth level surface and freezer paper to allow building to easily slide/rotate for assembly plus glue residue is easy to clean off this surface. Toothpicks are correctly recommended in the instructions along with drops of glue versus lines of glue. Lastly have fun and don’t rush, it can’t be assembled in a day!

Siding: Marklin’s 81481 “Metronom” train set is a good prototypical train to use with this station, along with the other “Metronom” offerings: 88370 (loco) + 87299 (bi-level coach set).

81481

88370

87299