Released as a kit, this type L2 freight car for SBB CFF FFS was produced by FR. It was delivered with nickel silver parts and dry transfer lettering, this one I purchased assembled from an Ebay seller.

The kit is another early example that used some Marklin parts with FR add-on parts as well as design. The chassis and wheel sets are Marklin and all other parts are FR. Nickel silver parts arrived on a sheet that required separation of parts followed by painting and lettering. The modeler who put this one together did a pretty good job, it appears 5 minute epoxy was used as the cement. Note: a final coat of semi-gloss water based lacquer is sprayed over the decals for protection.

The L2 freight car is used on the Swiss Federal Railways to haul scrap metal. The open grate design on top half of car versus solid sides maybe used to cut down on car weight.

Assembling FR kits is for experienced modelers, instructions are always printed in German and knowledge bending and cementing thin metal parts is a further requirement. Best painting is carried out with water based paints and airbrushing.

Siding: Faller’s laser-cut Bahnhof Huinghausen station provides the backdrop for this post.