MBZ loco shed 16 103 features a single pair of doors thus this one bay locomotive shed is for the simple repair and storage of locomotives along a branch-line somewhere in Bavaria. It features timber construction and terracotta tile roof. Very attractive little shed with a workshop.

Foundation is cement outlining a long rectangle.

Here is a good MBZ kit to start with, but it too has it’s challenges namely with paint.

The sides of this building are heavily cut/engraved by laser leaving rather toothy edges in the paper stock, it is highly resistant to paint. Priming the parts as recommended for all kits is helpful, but airbrushing a color over the primer is what I recommend with this kit. If the paper fibers are course in an MBZ kit paint will be difficult with a brush, however smooth fibers such as the roof panels in this kit readily accept paint: persevere!

Building up layers of paint with a brush gives surface depth and depth of color versus superficial uniform paint: nobody wants to be superficial!

Window details with glazing attached are glued between framework side panels and outer detail side panels. Note: after the the initial structure is glued and standing on its own with glue dry and trusses in place but windows still at Home Depot spray paint interior black or graphite black by Krylon.

Doors are hinged in this model, but the solution is not that subtle: 2 small brass cabinet hinges glued in place between layers of card-stock. This is the first time I have encountered this type of hinge solution, initially I thought: UGH!, but after painting them they aren’t too bad; they are far more durable than other solutions and hardly noticeable with the doors open.

Using airbrush I applied a final acrylic varnish coat in matte finish to the sides and a semigloss finish to the foundation. Note: airbrush masking tape comes in a variety of widths, it is well suited to isolating areas to be painted either by brush or airbrush.

The roof is comprised of a chimney and 3 smokestacks made of wood, the kit included 3 printed paper caps for the stacks which I didn’t like and didn’t use. I built up layers of paint loosely mixed together to give a mossy and terracotta color. The protective coat on the roof is micro-crytstalline wax commonly referred to as “Renaissance Wax”, it was applied sparingly with my finger. Note: If using this product it is important to apply as sparingly as possible to avoid a waxy build up. Renaissance wax is a non-acidic/non-yellowing wax available at art supply stores.

Siding: Reynauld’s is the USA dealer for MBZ kits in numerous gauges and MBZ paints.