Category Archives: Faller

Swiss Alpine Structures in Z

If you are a specialist Swiss modeler in Z chances are building structures have been difficult to find off the shelf. Or perhaps you are already building scratch-built structures. This post focuses on two rare off the shelf structures, but they could also be successfully built with balsa wood from your local hobby store.

Two very interesting alpine structures are a covered bridge and guardhouse used on the RhB railway (Rhaetian Railway). The covered bridge was offered fully built by FiDES of Switzerland, it featured balsa wood construction with printed (not etched) shake tile roof.

I wasn’t able to find any current information for this company, this one being the only example I have found. I cannot verify when the bridge was produced or whether it was marketed outside Switzerland, I found this one on Ebay.

In addition to being fully assembled the bridge was further glued in place within the cardboard carton thus I was not able to do a great job photographing it for the blog post. By my count the bridge incorporates over 100 individual parts each measured, cut and assembled: lot’s of work.

A similar bridge could be scratch-built using balsa wood and leftover parts from other kits for the roof. Good scenery construction could include this bridge known to Alpine hikers in multiples along a path and over water or even rock falls. Steep inclined features would also include granite outcroppings, pine trees, snow or random length grasses with pretty flowers. Bridge used in a town setting would also feature flower boxes because hey this is Switzerland.

Another good Swiss alpine structure is an older FR building kit for guardhouse on the RhB railway.

Very infrequently FR produces metal and wood structures that bespeak the precision and historical accuracy presented by FR in each one their releases. This building kit includes numerous dimensional strands of balsa wood as well as etched balsa and nickel parts including window frames.

Instructions are in German with excellent photo illustrations, using illustrations only I was able to deduce the order and correct assembly of all parts. Metal gutters and downspouts I will add in the future along with finish work, but at this point it looks pretty good, and I am happy with the results.

Although a very small building it required hours of assembly including measuring and cutting window glazing plus measuring and gluing all other parts.

A good solid building that features already painted metal shutters, doors and window frames. Roofing material had to be measured then cut, it was printed on textured paper to give the look of three dimensional terracotta tile, even the color is very good.

I probably won’t add aging to this structure as I associate Switzerland without air pollution, but perhaps even darkening is a correct patina? Chimney will get dressed up with a piece of flagstone during finishing touches as well as stucco application to sides with white paint. Footing for vertical support beam will also be painted concrete. And one cannot forget flower boxes hey this is Switzerland!

The prototype probably included a signal and short siding for passing trains, but as of this writing I have not found a picture of the prototype. For the layout this building could be connected to the hiking path previously suggested with the bridge, it too could have been a way station for hikers boarding a train, but this is a far off structure in the mountains inaccessible to auto traffic.

Siding: outstanding glue with easy applicator is Noch Laser-Cut Adhesive #61104 available from zscalehobo.com, I highly recommend this glue for laser-cut card stock, balsa wood, and metal or any combination thereof.

Marklin’s Steam Railcar “Kittel”: 88145

Wow!

I have been waiting patiently and other times impatiently for Marklin 88145, there were times I didn’t even think I would receive one, but last week I took delivery of one from the dealer Frank Daniels (zscalehobo.com). I can only wonder if the release was smaller than Marklin planned with some pre-orders not filled including a second one I ordered as soon as it was announced many moons ago. Note: pre-orders maybe filled, I haven’t received word as of yet that more are not on the way.

88145 is a further milestone in Marklin Z with prototypical accuracy, excellent running performance due to a brushless motor, and extremely fine detail work including many add-on parts. Add-on parts are always part of the finish detail work on Z locos, but the 88145 includes added details only found with the small firms of FR and Modellbau Z whose quality handmade products are unmatched but equaled with Marklin 88145. The add-on parts include cabin chimneys on roof along with top cap for boiler, but also grab-on rails fore and aft (nod to my recently deceased Father-In-Law who was a sailor) with platforms and accurate detailing on one end with buffer beam detailing including hoses, step-ups and coupling.

The paint scheme is crimson with lettering for DB thus an Era III locomotive but built in 1905 with firebox designed by Eugen Kittel. Two class Kittel CidT 8 steam powered rail cars were used on provincial railroads in Germany until their retirement in the early ’50s. A rather remarkable little rail car with but 4 passenger bays this locomotive would have hauled a freight car or two thus offering a dual purpose on less profitable routes.

As for the model — 88145 will prove to be a very big deal in Z modeling! And under the hood just as complex in design and fabrication as the outer shell! Parts diagram includes numerous mechanical and add-on parts thus confirming the necessary amount of assembly labor involved in this release.

The only point of comparison to be made with small high end manufacturers is add-on parts are made of injection molded plastic rather than etched nickel silver, but it is hardly a discrepancy worth noting as these parts are perfection! Running performance although not tested on all track by this reviewer could be assumed to be rather poor through turnouts or dead spots (due to lightweight and short wheelbase), but continuous rail there is no loss in power or performance witnessed.

All positive! The new Marklin 88145 is superb, but it maybe a once only production: the price tag on this release should have been comparable to other locos on the market with similar workings and detail work, instead it sold for at least half maybe 3 times less than comparable locos on the market: assembly labor alone must have been very high.

I would like to see Marklin continue with outrageous models such as this one, maybe a second line like the “Fine Art” series from a few years back that did not take hold.

A quick note on the carton: loco was delivered in the current white carton with loco housed in a two part plastic sleeve similar to ones used in the HO line to protect the delicate add-on parts, mine arrived with pristine paint and nothing broken. *Even the box was thoughtfully designed! Lastly: box has a “Made in China” sticker attached to it which makes perfect sense to me, Chinese labor is very good with fussy and intricate assembly of tiny parts and this model is exceptional in every way, it maybe the best Z loco in terms of detail work and craftsmanship.

Siding: I am a long time collector of Marklin Z, all periods in Marklin Z are represented in my collection. A few fears ago Marklin produced Z in China much to the consternation of fellow collectors, with very few exceptions “Made in China” did not resonate with me as poor quality or less collectible than “Made in Germany”, Z products continued to arrive during this time-frame that more than satisfied this collector. And I suffer from extreme pickiness! First time I have admitted to that in public. We may only have the Marklin 88145 because it was made in China which may turn out to be one of the most sought after models by Z-scalers in years to come.

A perfect boxcar for the loco and timeframe is a G 10 from set 86391 or 86392 (not pictured).

Siding: Faller’s 282781card-stock building is depicted in this post, it includes two kits glued together.

One More class F boxcar and counting: FR’s masterwork!

The workshop of FR Freudenreich has been busy with 3 releases of class F boxcars of FS-Italia. All releases of this boxcar have been limited releases and all sold out quickly.

This one is lettered for SBB with the typical white on gray signage associated with SBB upper left corner. Following WWII this boxcar was allocated to Switzerland with the firm commitment it never leaves Switzerland.

FR’s limited release includes a whopping 20 total units, it did not take long to disappear from store shelves so to speak. I recommend to those interested in collecting FR items a weekly visit to the website is a good idea. Items depicted as out of stock require pre-order for next production run, limited items are only on the website for as long as the edition is still available.

Siding: Faller’s Bahnhof Huinghausen station with attached freight depot is based on a station which now serves as a railway museum: Faller #282704 (*easy kit to build with interior masking for lighting details).

SJ Ra 994 “Rapid 10”: FR recent release!!!!!!!!!!

Applause applause!!!! FR would win the Z gauge “Best Model” of the year if such awards existed. The recent release and still available 46.132.21 is based on the prototype class Ra 994 “Rapid 10” lettered for SJ.

Just 10 Ra’s were built by ASEA between 1955-1961, they were used on express train service for 30 years. The subtle resemblance to America’s F7’s is not an accident for it was the inspiration for the Ra’s design.

Typical of Scandinavian locomotives is the inclusion of snowplows modeled in metal by FR. The locomotive features brushless motors, it is recommended regular servicing at 50 hour intervals. FR advises their shop for servicing due to the engineering complexities of their locomotives, sounds like the precision workings of a fine German camera or car. On the tracks FR’s locos run smooth and quiet with bright LED lighting.

This is the 2nd Ra locomotive released by FR the 1st was the earlier Ra 846 (#46.132.01), its headlamps included 3 large aft and fore this one is based on a later prototype which included a headlamp modification. FR is aware of all the historical details and changes thus rest assured each model is well researched and accurate in Z.

FR 46.132.01 – limited release of 32 total

FR 46.132.21

Siding: Faller’s “Corner Townhouse” item #282782 card-stock building is the backdrop in this post.

Group Effort: introducing E 69 electric Z-Modellbau

Faller and Marklin will help me introduce the superb Z-Modellbau E 69 02 “Pauline”  electric locomotive for DB (article #2101).

The prototype was built in variations starting in 1905 culminating in 1930. A beautiful model of the prototype never offered in Z except by Z-Modellbau.

I will be posting some interesting research on electric locos coming in the future but for now many photos and not many words.

 

Handrails and add-on parts bring great detail to this loco that is not surpassed by any manufacturer.

Metal construction with brass gearing and brushless motor are standard features of Z-Modellbau.

Z-Modellbau locomotives are delivered in a small blue box lined with foam and small instruction sheet noting this locomotive is maintenance free and should not be taken apart.

Laser-cut Buildings by 3 Manufacturers comparably priced!

A number of manufacturers offer laser-cut building kits here in the United States and abroad. Three German manufacturers are of particular interest due to their extensive line-up and varying design themes: Archistories, Faller, and MBZ. And their complementary European architecture suitable for German trains. I did not include Marklin’s fine laser-cut buildings because they do not offer anything as of yet in this price range. And some of their more modest size building kits come with freight car sets.

First I am a big big fan of Archistories thus a particular prejudice for these buildings need to be admitted to, but I want to compare options from these manufacturers that may make suitable companions in a town of your design.

I offer a simple comparison of one building by each manufacturer similarly priced, I purchased all three in the United States in price range $45 each. Archistories “Frye Railway House” purchased from ZScaleMonster.com (official USA distributor and also available from ZScaleHobo.com), Faller’s “Osterode-Sud Wayside Station” purchased through my local Marklin dealer by way of Walthers, and MBZ’s “2 Dimensional Building Kit” purchased through Reynauld’s (MBZ’s official USA distributor).

All three manufacturers offer something the others do not owing to each brand’s consistancy. For Archistories is a range of railway buildings including roundhouse, loco sheds, stations, water towers, and even operating grist mill and windmill all based on historically accurate examples. Faller is now offering townhouses, but they have released several small train stations, barn, and lumber mill. MBZ offers numerous railway buildings and rural buildings including barns and houses.

Innovations are hallmarks of Archistories and Faller, Archistories buildings include partition walls allowing for lighting specific rooms of there “Frye” house while Faller continues to use window masking with curtain detailing that is quite good (new LED technology makes lighting these masks much more possible). Faller also designs their open timber buildings (4 so far) with timber framework and individual inserts for stucco which give a very accurate prototypical look. MBZ offers excellent stone and masonry bridges for small rural settings that complement the rural structures of other manufacturers including their own.

Laser-cut is better than plastic with prototypical materials translated quite well into the matte cardstock of laser-cut. Precision engineering is also possible with laser-cut, thinner materials with fine detail etching creates the closest thing possible to the prototypes in Z, plastic is thick and chunky, its gloss distracting without painting intervention.

All three buildings could go on the same layout, each is accurately scaled. And in ‘Z’ many more buildings can be included on a layout in a given amount of space than any other scale, several towns can be realized with rural highlights connecting them.

A simple description of a building is often tied to construction value here it is most evident. Archistories buildings across their line-up are precision kits of the highest value with sharply delineated details at the corners, windows, and seamless marriage of materials. Faller likewise produces precision kits with realistically tinted materials and wooden features including doors and posts. MBZ is a less precise building kit bordering on primitive, their buildings are uniformly tinted so painting is necessary by the modeler, parts can arrive torn, parts are usually warped requiring extra attention to remove, and the materials have to be prepped before assembly to remove carbon dust generated by the laser-cutting that would otherwise impede gluing.

Instructions and constructions: Archistories instructions are the very best in the industry with no real comparison with any other manufacturer, if you follow the instructions in order you are assured of success: perfect corners and seamless roof. Faller’s buildings come together much in the same way as Archistories starting with a framework structure followed by exterior panels and detail work. Faller’s instructions are mostly excellent, I have assembled all of their laser-cut buildings and found that their roofs do not come together nearly as well as Archistories, a little gap is always found in the finished building. Roofing gaps are not possible with Archistories buildings unless a mistake was made during assembly. MBZ is another matter, their instructions are minimal, but so are the buildings which are simple glued constructions of floor, sides and roof. Just the roof is treated to an underlay making these kits a little more flimsy than I would like and no window masks or partition walls, chimneys are simple affairs with this MBZ kit and dormer windows are not possible to fully expose. The shutters are a nice touch with this kit, but foundation masonry is missing in the design along with a door. This kit is also described as a 2 dimensional building so it is also missing a back wall. The paper used for this MBZ kit is a lightweight cardboard that had the faint odor of having been burned, and the acetate had to also be cleaned of carbon. It sounds like a lot of criticisms for MBZ and maybe not!?! MBZ is producing kits based on prototypes of a certain age, and the reality of these prototypes may be accurately portrayed by these kits based on design but also materials. Well what do I mean by this? MBZ kits have a softer look to them than the other two manufacturers partly owed to the heavy laser etching and cardboard which may translate the time worn nature of these buildings much better than any other material.

Availability is a non issue with Archistories (ZScaleMonster.com and ZScaleHobo.com), they are always available through these dealers. Faller seems to produce their laser-cuts in a limited number so buy’em when you see them available at Walthers or better yet preorder them from your local dealer if you have one, if not order from an on-line retailer. MBZ is available from their USA dealer Reynauld’s in Elburn, IL, but their available inventory can be quite limited and back orders can take months from what I have heard. EuroTrains in Canada publishes an accurate inventory on their website which can be helpful.

In closing, each manufacturer discussed is making consider contributions to Z, but each in their own unique way: Archistories creates buildings the closer to real-life than the other two, Faller creates buildings with the traditional open timber construction using real timber framework and stucco inserts, and MBZ creates buildings that have endured the test of time.