Category Archives: New Releases

FR: 1960 Talsvagn Cinema and Bistro car of the SJ 46.220.31

Another new release by FR is the combination Cinema and Bistro car to supplement the 2 car sets: 46.220.32 and 46.221.32 with early 90’s paint scheme and lettering.

46.220.32

46.221.32

Based on the prototype half the car features elevated seating and cinema screen, other half features bar/bistro counter, bankettes and seating. And I am talking about the model too! Model features hand-painting of interior details thereby accentuating the elegant features inside this coach.

FR: Bio / Bistro (Cinema and Bistro) 46.220.31

Of course FR offers an LED lightpanel by Oliver Passmann custom designed for all the 1960 Talsvagn coaches, but in this case an easy modification needs to be made including filing down the slot housing the capacitor. A Dremel tool with blunt end fine grit grinding tool at low speed will remove enough of the extra floor panel giving room for the large capacitor. Note: other 1960 Talsvagn coaches do not require modification.

 

FR’s 1960 Talsvagen coach sets: 46.220.32 + 46.221.32

Furthering FR’s offering of 1960 Talsvagen coaches for SJ include the recent releases of 2 car sets: 46.220.32 includes 1- 1st class coach + 1- 2nd class coach and 46.221.32 includes 2- 2nd class coaches.

46.220.32

46.221.32

Painted and lettered for SJ following the paint scheme of the early 90’s these coaches also include the new logo: modern take on the winged logo dating back to the late 19th century which originally featured a railway wheel with chamfer and wings as seen here in a very early hat badge alongside a 1950’s updated hat badge:

Elegant bright colors exemplify modern SJ paint schemes following the originating paint scheme of red/brown with a simple boxed in SJ logo branding the 1st examples of 1960 Talsvagens.

A custom light panel comprising LED’s designed and manufactured by Passmann is available as an accessory on the FR website. Installation is not hard with the right tools including soldering iron, tweezers, magnifying goggles, and tool (Bug bending tool) for precision bending wheel wiper whiskers for electrical pick-up.

Note: Harald Freudenreich can deliver the coaches with bogies and roof panel removed to make installation of the light panel easier versus disassembling the coaches for the upgrade.

Siding: Bug bending tool is an indispensable tool for etched metal build kits, I haven’t found anything quite like it and I would highly recommend this item for every Z gauger’s tool box.

 

Marklin: 88135 newest ‘Ludmilla’ diesel

After reunification in Germany the class of diesel locomotives nicknamed ‘Ludmilla’ were reclassified BR 232 by Deautsche Bahn (DB AG) with their former life as BR 132’s of the East German railway system (DR- Deutsche Reichsbahn: 1949-1993) built starting in 1968 by the firm Voroshilovgrad (Russia).

This heavy weight freight locomotive is still in widespread use within Germany and Poland with 400 operating units. It is a beautiful and particularly impressive locomotive with two cabs and a length of 68′ 3 3/4″. More than 700 locomotives were built between 1973-1982 with 3000 hp motors and operating speed 75 mph. Other class ‘Ludmillas’ were soon retired after German reunification, but the class 232’s are still in use today nearing 50 year service record.

Marklin’s recent 2018 release of 88135 is painted and lettered for DB/Railion (Era V), it is now designated as ‘sold out’ at the factory. 88135 is the latest release in the series which includes: 88131 (2009), 88132 (2014), 88133 (2013), 88134 (2016), and 88135 (2018). Plus sets: 81450 and 81451.

Note: Marklin 88131 is based on the BR 234: rebuilt 232 with bogies allowing an increase in the  operating speed (87 mph)

Note: Marklin 88134 is based on the East German DR’s BR 132 with representative paint scheme from 1982

Note: Marklin set 81451 features the class 233 ‘Tiger’ (Ludmilla), this trainset is still available. A very nice and interesting H0 scale version of the Tiger (Ludmilla) includes the very latest cold steam technology and in digital operation can be controlled to simulate engine start-up idling (minimum exhaust), running operation (medium exhaust), and maximum exhaust, it is found under item #36431

81450 (2009/2010)

81451 (2017/2018)

88131 (2009) MHI Release

88132 (2014)

88133 (2013)

88134 (2016)

88135 (2018)

A common feature shared among all models in this class are LED headlamps and trailing lights, cab interiors suggested in white relief, superb running performance even at low speeds, excellent pulling power and varying roof equipment details specific to the prototype. A truly outstanding series of Marklin Z locomotives.

Siding: ‘BR’ designation preceding locomotive classification number is an abbreviation for the German word Baureihe which means class thus BR or class refers to locomotive classification

Siding: Archistories building kit ARC-114111 “Gantry Crane” is seen depicted in the background with Marklin 88135, it is a fine detailed kit with swiveling platform. It is available from zScalemonster.com and zScalehobo.com.

 

Marklin 88195: Swiss Federal Railway (SBB) ES 64 F4 locomotive

Marklin 88195 electric locomotive for goods and passengers is based on the SBB prototype ES 64 F4 with 2014 paint scheme. The class 189 locomotive is a four system locomotive allowing cross border traffic in Europe.

Built since 2003 by Siemens now in joint partnership with MRCE (Mitsui Rail Capital Europe) this one with paint scheme and lettering for SBB Cargo International. The striking black paint scheme and distinct white lettering includes painted light gray wheels in the Marklin model as the prototype adding another layer of detail. Four pantographs align with different voltage systems within the prototype as is included with the model. The 2 innermost pantographs on the model can take power from Marklin Z gauge catenary system. Roof equipment is accurately included with 88195 and it includes LED headlamps and marker lights.

Homologation refers to certification from an official entity in the case of the ES 64 F4 (class 189) prototype this certification grants the locomotive cross border travel within the European network including Germany, Austria, Switzerland, Italy, Slowenia, Croatia, The Netherlands, Poland, Czech Republic, Slowakia, Hungary and all ETCS-lines. Having met safety and technical operating standards the class 189 is one of the most important and most seen locomotives in Europe hauling both freight and passenger traffic and numerous paint schemes already represented in the Marklin Z gauge line-up include: 88191 (DB AG), 88192 (SBB), 88193 (DB AG / Railion), 88194 (Rail Traction Company / RTC), and 88195 (SBB).

The current release from Marklin includes the “new generation” motor which responds superbly in a brief test including smooth acceleration and deceleration even a slow speeds.

Siding: Marklin Era I-V building structure 2 stall locomotive shed is seen in background to support earlier locomotives not including the modern electric class 189, but the structure could nonetheless be seen along some routes the ES 64 F4 travels in Germany. This is a fine building kit of high grade cardstock currently available in Marklin’s “Small Maintenance Facility” with item #89806.

 

Lighting Unit for SJ Talsvagn: FR accessory upgrade

Scandinavian railroads are almost exclusively represented in Z by Freudenreich Feinwerktechnik (FR) which also includes Swiss and German prototypes. And less frequently PKP (Poland) and FS (Italy). Almost a year ago after many years in the plan and design stage the 1960 Talsvagn coach was released by FR in its first version with 2 “two car” sets with 1990’s paint scheme (blue with red stripe). Since this release there has been 6 more releases with early brown paint scheme (1960’s-90) and current NetRail paint scheme. Built into the design of each 1960 Talsvagn coach is the ability to retrofit a custom light panel manufactured in Germany by Passmann (Unna, Germany) and sold by FR as an accessory for this coach type. First a list of Talsvagn coaches thus far released.

FR’s releases are sometimes limited to a stated number while others are open editions, but all FR items should be considered rare as each is produced in small batches. The following is a list of 1960 Talsvagn coaches thus far:

46.220.02: open release (available to order)

46.220.12: open release (available to order)

46.220.42: limited to 25 total

46.220.52: limited to 25 total

46.221.02: open release (available to order)

46.221.11: open release (available to order)

46.221.42: limited to 25 total

46.221.52: limited to 25 total

Accessory lighting panel FR article #FR-TV #PA-512 is an LED light panel designed specifically for the 1960 Talsvagn coach, it is a flicker free lighting panel comprised of numerous LED’s which evenly illuminate in realistic terms. It is another outstanding accessory available from FR. Installation is easy (3/5) for those that have decent soldering skills. Instructions are included but lack English text which is not an issue at all because there are nearly 20 very good photographic illustrations.

I have a few notes to add to the included instructions that might be helpful for others retrofitting their coaches:

1. wheel sets pick-up the electricity from the track to power the light panel, each truck is connected with a wire to soldering points at each end of LED circuit board, insulated wheels should be located to one side of truck and this orientation should be carried out in the opposite position for other truck thus each truck’s pair of insulated wheel sets connect with different rails

2. whisker pick-ups should be carefully bent at 30 degree angle, 1.3mm brass bolt (kit includes 2) secures brass electrical pick-up to truck (FR accessory socket wrench 46.221.91 is designed for this bolt size), carefully reinstall wheel sets in aforementioned orientation. NOTE: before screwing bolt in place double check the pre-drilled hole goes all the way through truck housing otherwise the bolt will snap off!!!!!

3. one wire is included which should be cut in half or cut to length, before proceeding tin each end of wire (use of a little water soluble flux is advised), solder end of each wire to bolt protruding from truck with a little flux (touching soldering iron to bolt is better than wire to prevent melting of insulation (solder follows heat thus it is advisable to touch the thing you want to solder versus the wire, tinning the wire expedites the joining making it faster and easier)

4. reattach trucks into chassis with wire through pre-drilled hole, solder wires to solder points on circuit board, test LED panel before affixing to roof! Note: before soldering check orientation of circuit board with interior detailing, capacitors should fit snugly within compartment at end of car

5. roof attaches to circuit board with preinstalled double stick tape, but before installing double check middle clip on roof aligns with panel between window panes versus window otherwise the clip will be seen through the window and it will look terrible. Note: if a mistake is made with roof misalignment after LED panel is installed it will be very difficult to correct so double check/double check!!!! before gluing LED panel to roof!

Special Note: FR’s accessory light panel for the 1960 Talsvagn is easy to install with excellent instructions provided in a step by step format. Please do not deviate from the step by step instructions: all soldering should be quick and take place away from contact with plastic parts that melt thus do not install circuit board to roof panel before soldering wires to circuit board. And do not attempt to solder wire onto truck’s bolt after truck is reinstalled in coach body. All soldering takes place when trucks are separated from coach and circuit board is unattached to roof panel. Tinning wire before soldering makes things a lot easier as it allows for the wire to instantly grab the thing being soldered with minimal heat exchange.

 

 

SBB: FR Freight Car Set 41.345.12

The recent release of an SBB 2 car set by FR with type Xas73 ballast cars is already sold out, it took just a week for all 22 to be sold, but the obvious appeal is evident in this highly detailed metal car set.

For Era IV-VI, type Xas73 ballast cars are mechanically operated hoppers loaded with railway ballast: an operator can open and close 4 separate discharge gates by means of large handles modeled in FR’s car set.

Ballasting railway right of way is an important function of MOW services, but not many examples exist in Z at least for the SBB (Swiss Federal Railroad). Paint scheme of gray with white lettering is based on the prototype, this same paint scheme has been used with other rolling stock of the SBB not limited to MOW traffic.

Limited to 22 sets only is a very small edition compared to the sizable releases by Marklin and others. I was lucky enough to see it listed on the FR website and ordered immediately, one more reason to frequently check in with the FR website, registering your email with Harald Freudenreich will also ensure that you receive the semi-annual newsletter.

Car set comes packaged in the standard FR plastic box silkscreened with the FR logo, dense foam lining keeps the cars safe.

Pulling the ballast cars is a BR Re 4/4 II for the SBB. This general purpose locomotive was released by Marklin for Z in 2012 as item #88590.

 

 

Buying Marklin Z direct from the distributor

As a bit of an experiment I decided to buy what I consider to be a quick sell-out of the recently released railbus 88171 directly from Walthers. It was bought partly on impulse and partly to ensure getting one of these before they are sold out; they are already sold out at the factory even before arriving at Walthers in Milwaukee, WI.

My experience with Walthers apart from visiting their store/warehouse in person a few years ago is limited to ordering from them through the dealer network, I have never bought directly from them before.

Walthers policy is to charge full list price so as not to compete with their dealer network which is a good policy, but why do they sell to the public at all? The hour I spent in their tiny showroom in Milwaukee was full of customers some buying hundreds of dollars worth of items, and I guess they were as happy to pay full list price as Walthers was to charge them full list price.

The Walthers warehouse and showroom is not as appealing as the catalog much of which has to be called up to the counter to be seen. And the warehouse is a fairly unremarkable building, but I have to say the salesman at the counter were friendly and knowledgeable thereby offering a good place to find everything featured in their thick catalog and in stock.

Ordering from Walthers website was easy enough showing items currently in stock with prices. No problems at all placing an order! The downside was the order took a little while to ship from their warehouse (credit card is not charged until item ships), the small little item arrived in a big sturdy box, but the the Marklin railbus was not properly secured with wrapping thus separating from the plastic box entirely, luckily it did not scratch!

For collectors of Marklin Z it is probably best to order through a dealer at least for discounts, but also for individualized attention and guidance. Plus MHI releases are only available to dealers who are part of that subscription program thus not available directly to the public through Walthers. And some of the best stuff in Marklin Z are MHI’s!

Siding: Marklin’s 88171 Uerdingen VS 98 railbus is SUPERB with fully realized interiors and interior lighting with LED’s. Paint and lettering is crisp on this highly detailed model. Paired with the motor car (88166) available as an upcoming release this will be one of those must haves for collectors.

Marklin 81371: “Heavy Freight” Train Set (factory weathered)

Marklin’s Era III 81371 train set is still available but in limited supply: 499 sets. The train set features the heavy freight loco class 44 paired with 6 hoppers. Striking in appearance, the set features realistic heavy weathering and detailed running gear. Lot’s of action from greatly improved side rods is what’s going on in Z at Marklin these days: steam locos with grit and character more closely resembling their prototypes than ever before.

Manufactured well before the Second World War and through it until ’49 the BR 44 was a heavy hauler freight locomotive. Its numbers approached 2000, but not all locomotives stayed in Germany, twenty five percent stayed within the railways of PKP, OBB, CSD, SNCF, and DR after the war and today all but two remain operational.

The 81371 locomotive with operating number BR 44 1754 features 10 coupled and powered driving wheels with smoke deflectors. Weathering on the locomotive is tinted red with light but heavy application leaving all inscriptions legible which is a fine trick and difficult to achieve. The prototypical color of the weathering is suggestive of the acidity created by the mixing coal soot and steam on the sides of the iron boilers and plates.

Marklin has been slowly releasing weathered versions of locos and rolling stock after regular versions have debuted. For modelers looking for more and more realism these Marklin weathered items are tops! Surely impossible to weather as well as Marklin has done here certain talented folks out there could attempt the same with airbrushing, but color is as important as technique, and I am glad not to have to attempt it here!

*Archistories Prussian brick loco shed gives accurate scale to this loco thus providing historical context as well.

Six type Ootz hopper cars weathered with sooty black complete the set with lettering Erz IId. No coal loads are included, but the empty cars include weathering throughout their bays. This car type included two partitioned sections each with sloping hoppers for very quick dumping of bulk materials.

Siding: airbrushing results are far easier and trouble free with water based paints likewise water based final coat of clear lacquer should be considered to protect your work.

Siding: 81371 comes packaged in a carton housing cartons for 2 sets of 3 hoppers and 1 for the loco, item numbers printed on the cartons is as follows: hoppers (81371-01 + 81371-02) and loco (81371-03). Boxes are important to collectors and keeping them pristine is important too: open flap boxes with a butter knife to save from denting and dinging. And no butter on that knife!

 

Marklin’s Steam Railcar “Kittel”: 88145

Wow!

I have been waiting patiently and other times impatiently for Marklin 88145, there were times I didn’t even think I would receive one, but last week I took delivery of one from the dealer Frank Daniels (zscalehobo.com). I can only wonder if the release was smaller than Marklin planned with some pre-orders not filled including a second one I ordered as soon as it was announced many moons ago. Note: pre-orders maybe filled, I haven’t received word as of yet that more are not on the way.

88145 is a further milestone in Marklin Z with prototypical accuracy, excellent running performance due to a brushless motor, and extremely fine detail work including many add-on parts. Add-on parts are always part of the finish detail work on Z locos, but the 88145 includes added details only found with the small firms of FR and Modellbau Z whose quality handmade products are unmatched but equaled with Marklin 88145. The add-on parts include cabin chimneys on roof along with top cap for boiler, but also grab-on rails fore and aft (nod to my recently deceased Father-In-Law who was a sailor) with platforms and accurate detailing on one end with buffer beam detailing including hoses, step-ups and coupling.

The paint scheme is crimson with lettering for DB thus an Era III locomotive but built in 1905 with firebox designed by Eugen Kittel. Two class Kittel CidT 8 steam powered rail cars were used on provincial railroads in Germany until their retirement in the early ’50s. A rather remarkable little rail car with but 4 passenger bays this locomotive would have hauled a freight car or two thus offering a dual purpose on less profitable routes.

As for the model — 88145 will prove to be a very big deal in Z modeling! And under the hood just as complex in design and fabrication as the outer shell! Parts diagram includes numerous mechanical and add-on parts thus confirming the necessary amount of assembly labor involved in this release.

The only point of comparison to be made with small high end manufacturers is add-on parts are made of injection molded plastic rather than etched nickel silver, but it is hardly a discrepancy worth noting as these parts are perfection! Running performance although not tested on all track by this reviewer could be assumed to be rather poor through turnouts or dead spots (due to lightweight and short wheelbase), but continuous rail there is no loss in power or performance witnessed.

All positive! The new Marklin 88145 is superb, but it maybe a once only production: the price tag on this release should have been comparable to other locos on the market with similar workings and detail work, instead it sold for at least half maybe 3 times less than comparable locos on the market: assembly labor alone must have been very high.

I would like to see Marklin continue with outrageous models such as this one, maybe a second line like the “Fine Art” series from a few years back that did not take hold.

A quick note on the carton: loco was delivered in the current white carton with loco housed in a two part plastic sleeve similar to ones used in the HO line to protect the delicate add-on parts, mine arrived with pristine paint and nothing broken. *Even the box was thoughtfully designed! Lastly: box has a “Made in China” sticker attached to it which makes perfect sense to me, Chinese labor is very good with fussy and intricate assembly of tiny parts and this model is exceptional in every way, it maybe the best Z loco in terms of detail work and craftsmanship.

Siding: I am a long time collector of Marklin Z, all periods in Marklin Z are represented in my collection. A few fears ago Marklin produced Z in China much to the consternation of fellow collectors, with very few exceptions “Made in China” did not resonate with me as poor quality or less collectible than “Made in Germany”, Z products continued to arrive during this time-frame that more than satisfied this collector. And I suffer from extreme pickiness! First time I have admitted to that in public. We may only have the Marklin 88145 because it was made in China which may turn out to be one of the most sought after models by Z-scalers in years to come.

A perfect boxcar for the loco and timeframe is a G 10 from set 86391 or 86392 (not pictured).

Siding: Faller’s 282781card-stock building is depicted in this post, it includes two kits glued together.

One More class F boxcar and counting: FR’s masterwork!

The workshop of FR Freudenreich has been busy with 3 releases of class F boxcars of FS-Italia. All releases of this boxcar have been limited releases and all sold out quickly.

This one is lettered for SBB with the typical white on gray signage associated with SBB upper left corner. Following WWII this boxcar was allocated to Switzerland with the firm commitment it never leaves Switzerland.

FR’s limited release includes a whopping 20 total units, it did not take long to disappear from store shelves so to speak. I recommend to those interested in collecting FR items a weekly visit to the website is a good idea. Items depicted as out of stock require pre-order for next production run, limited items are only on the website for as long as the edition is still available.

Siding: Faller’s Bahnhof Huinghausen station with attached freight depot is based on a station which now serves as a railway museum: Faller #282704 (*easy kit to build with interior masking for lighting details).