If it is possible to visit a late 19th century western United States town built by gold perhaps this station in its small dimensions satisfies that goal. Measuring 5 inches in length x 2 1/2 inches in overall width x 2 inches in height the “Goldtree Station” by Archistories is the fictional hub and gatekeeper for the outside world, it greeted new comers with grand dreams of making it rich and goods to keep a decidedly inhospitable landscape habitable.
This year marks the important anniversary of the Transcontinental Railroad: 150 years East and West coasts joined by rails at Promontory Point, Utah. And a good time to consider modeling a western gold rush community in Z starting with this nice building exclusively sold by ZScaleHobo.com. And Marklin’s “Bumble Bee” locomotive and its passenger set from a few years back are a good train set for this station.
A fairly simple to build kit featuring partition walls which aid in realistic lighting effects, filigree parts which add realism to platform supports, and a mix of building materials including terracotta roof tiles and wood construction.
Goldtree station signage is laser cut with an appropriate American style font of the 19th century.
Railroads grew quickly after completion of the Transcontinental Railroad as did towns throughout the United States. Station and depot types changed too thus small stations with attached freight depots largely disappeared in the teens and 20’s, they were replaced by masonry structures supporting a network of hubs as people and goods were transported all over the United States. Towns who’s singular purpose supported the gold rush either grew independent of it or largely ceased to exist.
Note: exclusive worldwide dealer for this item is Zscalehobo.com
Construction notes: the ingenious feature of this Archistories kit are snap-in window frames and glazing, pre-cut glazing snap into place with gentle pressure followed by window frames, filigree timber sections are finally glued in place and permanently seal windows. Open freight doors are possible but interior detailing will need to be designed by the builder. *use glue sparingly and use great patience with light paper parts which cannot be realigned after gluing, plus snap-in window frames are prone to easy breakage, fraying and distortion.
Another important construction note: Part F10 is a delicate filigree part comprising the main entrance framework, after removing this part from the part sheet two more tabs need to be removed from either side of door frame: brackets should be flush to the structure. In my interpretation of this building it was missed thus reflected in the photos. A second important point is to install the 4 brackets (Part H4) for freight room before attaching roof.
