Author Archives: garygraves

DB BR 44 Steam Locomotive: 044 665-8

After WW II the DB acquired 1242 class 44 steam locomotives of a total 1989 locomotives produced from 1926-1949. The attached photographs document the original DRG Class 44’s, a variant was produced for this class during the war, the class 44UK construction was limited and simplified and included but was not limited to the eliminating the smoke deflectors and cab side windows of the original class 44 as a matter of cutting costs. Latter in the 1950’s OBB gave the DB 9 locomotives and the DB gave SNCF 291 for war reparations. According to my calculations a total of 316 were scrapped or destroyed at war’s end. Originally designed for goods trains of 1200 long tons for the hilly Mittelgebirge region. In the late 50’s the DB converted 32 44’s to oil firing, these variants were reclassified as BR 043 for the DB. The class 44 3 cylinder steam locomotive proved its worth and continued in service with the DB until 1977. On October 26, 1977 the last steam locomotive for the DB made its last run: BR 043 903-4.

The operating number proceeded by ‘0’ indicates this photograph was made “on or after” Germany’s reclassification of locomotives in 1968. According to the documentation that came with these photographs this BR 044 665-8 was working on this day in Crailsheim, Baden-Wurttemberg.

Marklin 88973 with operating number 44 1374 (released 2012 – 2014):

Note: buffers painted with warning stripes!

Siding: Marklin has thus far released three Era III BR 44’s: 88971 (operating number 44 494), 88972 (MHI Release with operating number 44 100), and 88973 (operating number 44 1374).

Siding: many excellent Era III freight loads are available for this locomotive including the GI 11 boxcars depicted in these photographs. Marklin’s recent release of weathered GI 11’s can be found in the 10 car set (available individually from Walthers): 82559_1-10. These cars feature beautiful weathering!

Marklin 82559

 

Marklin 89792 + 89793: Bahnhof Hamburg Dammtor Station Kit

Bahnhof Hamburg Dammtor: opened July 7, 1903

If you are up for an ambitious project in ‘Z’ this is it: 89792 and 89793 building kits for the Hamburg Dammtor Train Station. Two kits sold separately to comprise the station building and approach including arcades and bridges.

The cost for the kits is very reasonable considering the scope of these kits and the accurate translation of the prototypical building: discounted retail for 89792 is $249, and 89793 is $149. Both kits are made of laser cut card stock which has been a growing trend in building kits partly due to the material itself, laser cut buildings look great and their matte and pre-colored surfaces contrast nicely on a layout. In ‘Z’ or any other scale these are big kits measuring nearly 55 inches long, and in ‘Z’ there are lots of small parts to assemble.

Finished dimensions: 20 7/8 x 8 1/4 x 4 5/16 inches (89792) and 33 1/2 x 6 x 1 3/16 inches (89793). Both kits are card stock with one small exception, the station includes 4 caps and spires on the entry towers that are cast resin and painted to match the rest of the kit.

Marklin commissioned MKB Modelle for these build kits. As of writing this post I have not started assembling these kits, I am hesitant to build them until I design a layout for them first. A layout to include these kits can be historical based on the 1903 opening of the station or contemporary with the arcades and bridges,  it can also be prototypical rendering or an interpretation. Current urban planning for the Hamburg Dammtor Station includes numerous intersecting roads with few adjacent buildings, modeling some or all of these roads will be a challenging undertaking for the most ambitious.

Four lines run through this station so the track planning is another consideration. Nearly 5 feet from end to end for both assembled kits, and if it is incorporated into a loop the dimensions will balloon to 7-8 feet, this is after all probably the most ambitious project to date in ‘Z’ with an estimated build time of 50 hours for 89792 alone.  Reviewing the part sheets and instructions these kits look well organized, and the instructions are clear. Heavy card stock, medium weight card stock and lightweight card stock are all used in these kits. The kits start from a rigid foundation and build up and out, in some cases with as many as 5 layers to build the exterior walls. No covering for the platform or track concourse is included, you will need to come up with your own solution, I highly recommend Faller material here available in the United States from ZScaleHobo.com (updates will follow for my own solutions here). Accessorizing and laying track in the station will be much easier or only possible before installing the trusses. Partial exposure of the interior might be interesting by reducing the roof sheathing and maybe consider leaving the roof un-cemented in case you need to access the interior in the future.  I have recommended a UHU Glue for attaching window glazing in the past, for this kit I would recommend the standard assembly glue: all-purpose, wood, or polyvinyl acetate, but each will require the added step of roughing up the acetate in the area to be glued. Another consideration is a very level work surface, even though the parts snap together assembling the building on a very level surface will insure there will be no warp or curve to the base, I recommend a piece of masonite for a smooth level surface and freezer paper to allow building to easily slide/rotate for assembly plus glue residue is easy to clean off this surface. Toothpicks are correctly recommended in the instructions along with drops of glue versus lines of glue. Lastly have fun and don’t rush, it can’t be assembled in a day!

Siding: Marklin’s 81481 “Metronom” train set is a good prototypical train to use with this station, along with the other “Metronom” offerings: 88370 (loco) + 87299 (bi-level coach set).

81481

88370

87299

DB BR 39 Steam Locomotive in its year of retirement: 1967

BR 39 for the DB sits idling along the tracks in Esslingen, Germany, it appears to be in very good condition following many years of service owing to excellent maintenance. This locomotive started out as a Prussian P10 of the “Mikado” type 2-8-2 for passenger service. A total of 260 locomotives were built in the years 1922-1927. Built by Borsig the P10 was designed with the squared off Belpaire firebox. Following the merger of the state railroads with Deutsche Reichsbahn the P10 was reclassified as DRG 39. Eventually the DB operated the class 39 who fitted it with Witte smoke deflectors and pairing it with T 34 tenders. By 1967 the DB had 3 BR 39’s in service which were stationed in Stuttgart, in this year “The Star of the Rails” was retired from service.

Marklin 88090 DRG’s BR 39

Marklin 88091(Insider) KPEV BR P10

Marklin 88092 DB’s BR 39

Marklin 88093 KPEV BR P10

Marklin 81362 DB BR 39

Faller 282781 (Provincial Houses): two kits assembled with mod.

An update to my recent post about Faller’s 282781 “Provincial Houses” kit includes a small modification, assembling multiple kits (2), and variations. A terrific and important building kit for ‘Z’ is this recent release, it’s fun to assemble with lot’s of variations possible.

One kit comprises 4 separate buildings that can be combined in a number of combinations, add a second kit and the choices abound.

It took longer to assemble the first kit due to learning curve that seems inherent with all ‘Z’ projects, I would estimate the average assembly time dependent on average skills and patience is 4-6 hours. A good discounted retail price for each kit is about $34.00.

So for this project the investment is about 12 hours to assemble and about $70.00 for the two kits, but it is a small addition to a layout so budget concerns may trump to benefit. Lot’s of reasons to make the investment in this small building including great detail inside and out, but it is also a design that is traditional German architecture combining all of the most used styles including stucco and open timber with tile roof.

Dimensions: 1 kit – 2 1/4 inches (height) x 1 1/4 inches (width) x 2 1/8 inches (length), for 2 kits – 2 1/4 inches (height) x 1 1/4 inches (width) x 4 1/4 inches (length).

Modification: when two units of this 4 unit kit are assembled there will always be a seam present, I modified this kit with the addition of shoring lines that are sometimes evident in multi-unit construction using card-stock leftover from the kit. Adding this modification to these buildings is far less distracting than the seam we are left with.

Prussian Railway Troops

The history of rail brigades in Germany starts in 1866 with the Prussians, and their mobilization during the Austro-Prussian War. The brigade comprised railway engineers who were first soldiers with responsibilities extending to maintaining, repairing, building and destroying rail lines. During the 1870 Franco-Prussian War there were 5 Prussian units and 1 Bavarian field unit comprising more than two hundred soldiers and civilians. On October 1st, 1871 a railway battalion was formed and nearly 20 years later a brigade. By 1890 the brigade was assigned a depot and operating responsibilities for the Royal Prussian Military Railway (Berlin). In 1899 the training of railway troops was transferred to the army and the Royal Prussian Military Railway fell under the jurisdiction of the Corp of Transport. The Royal Prussian Military Railway comprised the line between Zossen (30 miles south of Berlin) to Juterbog, it was used for the training of the railway troops. Their responsibilities were further extended to field railways and during war would be reinforced with Landwehr troops.

Photo: Telegraphists for the Eisenbahn-Regiment II in May, 1907. The Eisenbahn-Regiment II was formed in 1866 and connected to the Royal Prussian Military Railway in Berlin.

DR Class 01 Steam Locomotive

The Class 01 Express Steam Locomotive awaits passengers one morning in the summer of 1968. The older design baggage car and “Thunderbox” coaches were still used at this time by the DR at reduced speeds, the 01 was capable of 80mph, this photograph carries an inscription that the locomotive operated at 60 km/hr (37mph) in the Hornbach region. This Ostdeutschland BR 01 is operating accordingly in East Germany, the photograph’s inscription records the location as Hornbach. Operating number plaque indicates this locomotive to be 01 527, it varies in appearance to the DB class 01’s with the appearance of a continuous cover for the dome which gives evidence that this was one of 35 locomotives rebuilt in 1962 by the Reichsbahn Repair shop in Meiningen, the rebuild included Witte smoke deflectors, new cab and boiler positioned higher on the frame of the locomotive. My research does not verify the disposition of this locomotive so presumably it was scrapped, but the class 01’s operated for the DR until 1982, their service displaced with the advent of the diesel ‘Ludmilla’ introduced in the 1970’s. Marklin has not produced the DR version of the class 01 in Z, but maybe it will be a further development of those so far offered for DB: 88010 (Insider) and 88011, we will wait to see if it is included in the ambitious plans at Marklin.

Siding: The Soviet built ‘Ludmilla’ diesel locomotive was introduced to the DR in the 1970’s thus eventually ending the long career of the class 01 locomotives. Marklin’s last version of the Ludmilla in Z was 88134 based on the class 132 prototype from 1982.

Marklin 88134

Insider Locomotive 2012: 88010 – BR 001 DB

Marklin’s Insider Model for 2012 was one of the first of the new generation of steam locomotives featuring completely new tooling with impressive detailing of side rods and LED’s.

Based on the prototype, BR 001 161-9 is an Era IV locomotive following the German Reclassification of 1968 which added an ‘0’ to the operating number.

Built in the mid 1930’s this locomotive class was the first to be “standardized” thus parts were universally available throughout Germany. More than 200 class 01’s were manufactured from 1926-1938 with some continuing in service for the DR until 1982 and the DB until 1973.

Marklin’s 88010 represents the prototype from 1968, the appropriate coach set for this locomotive is Marklin 87401 comprising 5 cars in ‘pop’ colors with destination boards “Braunschweig – Aachen.” Pairing 88010 and 87401 will create a prototypical trainset with associated destination boards for Braunschweig – Aachen from Era IV.

German BR 01 Express Locomotive: DB’s BR 01 154

The inscription on the verso side of this photograph gives the place and date as “In Nuremberg 1966.” Seven years later this class of locomotive would be retired from service for the DB, this one in 1968. As a side note: Class 01’s continued service until 1982 for the DR. Built starting in 1926 the BR 01 express steam locomotive was in service for many years, this one being BR 01 154 built during the time-frame 1930-31. In 1950-51 this locomotive along with 4 others were rebuilt with Witte smoke deflectors as can be seen in the photograph along with several improvements including Heinl mixer preheater, turbo pump and combustion chambers in the boilers. The rather clear representation of the tender was one of three types T 30, T 32 or T 34 varying by length to fit a particular turntable being used. The class 01 steam locomotive was the first to be considered “standardized” meaning parts with exact specifications could be used to repair this locomotive throughout Germany.

Inside the cab:

Specs for this rebuilt locomotive:

Service Weight: 109.3 long tons/ 122.5 short tons

Adhesive Weight: 59.1 long tons/ 66.1 short tons

Axle Load: 19.7 long tons/ 22 short tons

Power: 2417 hp

Grate Area: 46.4 square feet

Superheater Area: 1022.6 square feet

Resource: DRG Class 01 Wikipedia Page

The uniformed train driver poses next to his locomotive as his fireman peers through a cab window, his briefcase presumably contains his log and maintenance checklist. Standing along the rails of a gantry crane the train driver waits to board the locomotive which is in line to receive coal and water. A few chunks of coal outside the coal bunker suggests it was just loaded along with water as evidenced in the run off near the fill hatch. The train driver was more than the operator of the locomotive, he was responsible for the well being of the passengers and locomotive, following safety and maintenance protocols he was operating a locomotive of such power it could reach speeds upwards of 80 miles an hour. Interpreting signals on the right of way was assured by this well trained individual who could operate a steam train and deliver its passengers in accordance with printed schedules: safe and timely. Physical demands of the job cannot be overstated, this was not an easy way to make a living. When this photograph was made the locomotive and train driver were of similar age, two years later the locomotive would be retired, and the trainman with his specialized skills may have continued operating steam locos in this class for the DB until 1973.

Marklin has produced two BR 01’s in ‘Z’ since 2012: 88010 and 88011. Released in 2012, Marklin 88010 was the Insider Model for that year as BR 001 of the DB with operating number 001 161-9 based on the Era IV prototype. Two years later the 88011 was released based on an Era III prototype with operating number 01 147. Both locomotives represent the new generation of steam locos by Marklin with superb detailing of the operating equipment and side rods.

88010

88011

Both locomotives look virtually alike, the distinguishing feature is the operating numbers.

Siding: a short ton is 2000 pounds and commonly called a ‘ton’ in the United States whereas a long ton is 12% larger, it is referred to also as ‘Imperial Ton.”

Siding: In 1968 Germany reclassified their locomotives, steam locomotives at this time were given an extra ‘0’ thus the Marklin 88010 is a BR 001.

 

Faller 282781: Kleinstadthauser “Provincial Houses”

Faller’s two recent laser cut building kits offer modelers residential building types including the large townhouse (282 780) and small townhouses (282781). The latter Faller describes as Provincial Houses”. For this post the 282781 kit will be featured, it is essentially 4 separate building kits with 4 distinct designs including open timber, stucco, terracotta tile roof and slate roof. One pair with terracotta tile roofs and one pair with slate roofing.

Parts are delivered on well labeled sheets along with window masking and window glazing.

Each building is small, so patient assembly of small parts is necessary even with all 4 buildings glued together they are still small compared to a scotch tape dispenser.

Each building is fairly skinny and unfinished on the back side with the intent that like pairs would be glued together giving a two sided building. Likewise the pairs can likewise be glued together.

One can also use these buildings as backdrop thus leaving pairs unglued. There are lots of options including 15 variations on the order of these buildings in relation to each other.

Each roof can be assembled according to instructions but they can also be installed in reverse order, but due to the design of each building type the terracotta roof cannot be used on the building using the slate roof, the terracotta roof sweeps out from the dormers.

This is an adaptable kit that combined in multiples will allow continuous residential blocks to be realized in the context of a large layout. I recommend following the illustration on the box to determine order of assembly, the stucco building without dormers is the easy one the start on first, and the open timber and stucco building will take longer to finish along with the other building with terracotta roof tiles.

The instructions are very good, but I would add a few notes: 1. get acquainted with the dormers and how they assemble before gluing, the long side of side frames attach to roof.  2. roof sheathing has a correct orientation with a top and bottom, have a good look before gluing and imagine what this looks like in real life.  3. The pair of black roof buildings need to be prepped to insure flush assembly: with a sharp razor blade trim back the roof framing to make flush with the backside of each building, test for the two buildings join evenly before gluing. 4. stucco sections are individually cut out and glued in place in the open timber framework which is real wood, this step is time consuming but install no more than two pieces at a time to prevent loss of parts. 5. Another note on open timber, the wood is tinted using a water soluble color, the water soluble glue you use will likely allow the wood tint to bleed into the white cardboard filler sections: no worries the prototypical buildings in Germany have these qualities in real life. In general imperfections will add to the realism of a stucco building. 282780 and 282781 are very good kits designed to be used in multiplies and thus one can build continuous city blocks as can be seen in Europe.

Finished project with all four units glued together:

Note: there is a seam that runs vertically along each end, my plan is to assemble 3 more kits for a long running block of these buildings, and I plan to add a strip of similarly tinted card stock to cover the seam thereby suggesting a shoring line that can be seen on some buildings similar to this type in the United States. Another option I might try is applying a latex primer over each finished end and repainting in a suitable color, but this option might look too different as for surface texture, it might be better left alone (?).

Here are the finished 282780 + 282781. The impressive scale of these buildings are accentuated with multiple units, they will surely add interest on any layout.

Faller 282780: Town House

Just hitting the United States market by way of Walthers are two new laser cut card multi story town houses: 282780 “Town House” and 282781 “Provincial Houses.” This post concerns 282780, my dealer just notified me that my pre-order for 282781 is in, its posting will follow.

What to do when modeling an urban or provincial scene after having committed to laser cut card stock building kits, so far the choices have been limited to some very good rural buildings, and hopefully more will follow with the release of these kits.

This Faller kit features good detail including carved sandstone ornamentation, silver foil facade, dentil molding, and window masking unique to Faller. Challenges with this kit include many small delicate parts for the facade, construction of chimneys, and multi-part construction of dormers.

In the days before LED’s I would not spend a lot of time discussing the merits of the window masking, I found it too dense to light with a proper bulb without starting a fire. I exaggerate, but success was very limited with what was available before to properly light these structures. Today LED’s are available for lighting Z scale buildings with a great success, they are cool, long lasting (10,000 hours), and priced right. Plus the illumination is adjusted with individual dimmers controls. Everything gets lit with Faller’s window masking, but this can be altered by placing electric tape over individual windows you do not want to light. Masking material is provided if you want to light the dormers, you will also need to cut the top of the masking material before inserting into building. I have built three of these buildings, and I plan to build at least three more, I will vary the lit window effect with those buildings by lighting maybe just one or two floors or variations between what is lit on the facade side versus the back side of building. It is also a possibility to install the buildings close together for a realistic look.

Maybe this should not be your first laser cut card stock building, but it is easy for those with a couple of other buildings under their belt.

American Scenics Plug-In LED System includes many options and choices. Starter kit includes a couple of led’s, hub, and transformer, it is the best value.

The finished 282780 assembled with three kits:

Siding: several companies have cleverly designed their building kits for realistic lighting: Faller with window masking and Archistories with partition walls. If you haven’t tried Archistories building kits you are missing out on something special, they are available in the United States at http://www.zscalemonster.com and http://zscalehobo.com.