Category Archives: Era I

MBZ Rural Structures: 16100 (Granary)

MBZ 16100: Granary

MBZ’s ‘rural’ structures include houses, barns, farmstead out-buildings and granary. It is an extensive line of rural structures based on German prototypes which in some cases can be adapted to fit an American themed layout. In some cases German prototypical barns moved to the United States with little variation from those found in Germany. The long history of European immigrants settling in the United States have expressed influence in many ways and combinations thus looking for interesting buildings for American layouts could thus be found within MBZ’s line-up.

An older design granary used for storing animal feed or grain is a striking example of a rural German structure used for the same purpose as American grain elevators, but this one based on a late 19th century structure stored bagged grains and feed versus silo storage featuring automatic chute feed. This granary was a centrally located storage facility located near a siding supporting numerous local farms.

Built using MBZ ‘Pigment Starter Set’ (R72217) and Noch Laser-cut glue.

Note: smokestack was not included with kit, I made it using polystyrene tubing. I did not install dormers, I liked how it looks without them.

Available at Reynauld’s for $99.55.

MBZ Laser-cut Kits: Practical Notes

Two buildings from MBZ’s large farmstead kit 16071 comprising farmhouse and 3 barns including one with an apiary.

MBZ building kits are German inspired architectural forms available in multi-scale kits including an extensive line-up in Z. Building and finishing a kit has unique challenges that are quickly overcome after constructing a kit or two. Included in this post are a few notes I hope are helpful for successful building.

MBZ kits are automatically age old buildings with history time-stamped into their design and fabrication. Giving a model building history through weathering and aging is easy with MBZ, each kit starts out with a baseline moment in time at least 50 years ago. Adding more use and age to the look of a building is up to the modeler: perfect kit buildings for Era I, II, and III.

Cardboard used in MBZ kits vary from other manufacturers, its natural color is gray/brown thus painting is required after the application of a solvent based primer.

Prepping the cardboard requires priming with MBZ Primer R72214 (pre-mixed) or R72211 (unmixed), I recommend the pre-mixed version. Priming is required due to future mold issues as suggested by manufacturer. Flattening parts after priming and before gluing is required: large parts including roof and sides warp heavily after priming, but rolling parts against the warp flattens them easily. Manufacturer suggests painting with pigments applied with sponge. MBZ pigments are water soluble, and they can be mixed together for custom colors. Consistency of paint should not be too wet or dry, it is applied with a wet sponge but avoid caking pigment. Air-brush masking tape should be used to isolate sections to be painted with sponge application. Dry-brush, air-brush and fine brushwork can be followed up later in construction for fine tuning. Pigment paints dry matte, and I recommend a light air-brushing of matte water based lacquer as a final protective coat.

The manufacturer suggests UHU ‘Hart’ glue which is fast setting but I find it messy to work with, I recommend Noch ‘Laser-cut’ glue which is fast setting and quick drying. Note: other fast setting white glues or wood glues should work well, but a fine applicator bottle available at craft stores should be considered. The few parts that are not always included in MBZ kits are ramps and steps which must be built by the modeler. No partition walls are designed in many of these kits thus requiring custom masking for interior lighting. I nice feature of these kits are stone-laid interior floors which can be exposed in a diorama through open doors with perhaps a wagon parked within the barn.

Note: barn buildings illustrated in this post used dry brush technique to highlight and paint stone foundations whereas sponge application of paint was used for uneven authentic weathering of paint. For glazed terracotta tile roofs I apply a light application of Renaissance Wax (micro crystalline acid free wax) which gives a gloss surface without being too glossy or too thick looking plus it is a non-yellowing museum quality wax available at library supply houses and fine art supply shops.

Three painting kits offered by MBZ will get you started, I recommend ‘Pigment Starter Set’ (R72217), it includes numerous pigments, primer (unmixed), and sponge for $55.49, it was more than enough for painting 13 kits. The kit includes a very high quality sponge, but other sponge shapes and sizes are available at art supply shops, they fall within the category of pastel sponges which are tight cellulose sponges which can be used wet or dry, pastel artists use this type of sponge dry only which readily allows mixing of charcoals and pastels.

Note: MBZ kit builds are best treated with a loose approach without worry of precise paint application: using a dirty sponge gives much more depth of color than a clean one between coats of paint.

Siding: Reynauld’s in Illinois is the exclusive USA dealer of MBZ, they have in store examples of finished kits as well as paint and accessories.


Royal Wurttemberg (K.W.St.E) T 9 tank locomotive: Marklin 88952

The 2005 release of the Marklin T 9 tank locomotive painted and lettered for the Royal Wurttemberg State Railroad (K.W.St.E) featured a 5 pole motor and it was the first of its type for this railway produced in the mini-club line-up.

The 88952 produced in 2005 as a “one time series” celebrated “200 Years of the Kingdom of Wurttemberg.”

The Era I locomotive is appropriately coupled with Wurttemberg coaches: 80105, 8700, 8701, and 8739. Marklin’s recent release 5 coach set is also a very good choice: 87009.

Coach 8739 trails the T 9 with destination boards for Boll-Goppingen, its operating number E4 2733 was produced by Marklin from 1989-1998. Eleven years in production does not make this coach particularly rare, but this open corridor coach has been popular with modelers of early trains. Check out the next section detailing the relationship between this coach and locomotive.

Following years of innovation by modelers of Z one such development proved invaluable: marrying coaches with short locomotives. Locomotives of short length and weight have proven to be less than rewarding to operate on the mini-club layouts with turnouts and crossovers with their slight dip in power, short locos are challenged to pass freely through these track features, but one creative minded individual came up with a solution: wiring the axles of a coach to the leads of the locomotive thereby extending the length of the locomotive. In this case the 88952 with 3 powered axles has been extended with 2 additional axles. Wiring the coach involves some soldering and drilling with micro bits, but it is overall a fairly straightforward and easy repair the second time around, the first time should be counted as a learning curve. Adding an LED light panel at the same time is just a little more work. In this example a draw-bar was installed thus permanently coupling the loco and coach together. Performance for this type of locomotive is improved greatly.

Here are photos of the electrical upgrade:


Marklin Special Imprints: 8661 type box car

In the rare collectible category of Marklin Z special imprints is one for 8661 style box car. The early box car type with brakeman’s cab (8661) models an era I and II freight car, it has been released in Marklin’s regular program for many years primarily as a bier wagon but also as a general freight car with and without advertising. The prototype’s wooden construction is detailed in the model depicting vertical boards, corner iron mending plates, round buffers, and windows on all sides of brakeman’s cab. Using this style of freight car is another category of special imprints, other freight car types include modern examples. As few as 100 wagons were produced for any given design starting in 1991. Historically a special imprint was commissioned by a private individual/firm in collaboration with the design team at Marklin thus limited Marklin productions.

Note: outside firms through the years have purchased unpainted freight cars of various types from Marklin for private printing, these cars are referred to as “Industry Prints”. Industry Prints differ from Marklin special imprints with the omission of ‘m’ often but not always printed very small on two sides of freight cars. Further verification of a Marklin special imprints can be found using the Miba/Monk list, if it is on the list Gilles Monk has collected it and archived these treasures on his exclusive list; Mr. Monk only collects Marklin special imprints thus Industry Prints will not be included on his list or confused with the Marklin models.

As a collector of Marklin special imprints I can attest to the patience required finding these cars, my 8661 car collection is 10 years in the making with as few as 1 found in a year to more recently finding 10 within a two week span. Most special imprints are secondary market thus having passed through at least one collection. More successful collectors will find these cars listed by European dealers on Ebay, but ZTrackResale.com is another source for Marklin collectibles as well as other Z gauge items in gently used condition (highly recommended source!).

Included here are 10 special imprints of the 8661 style box car recently added to my collection:

Wimpfener Heimat-Bote released 1995. Koll’s #95701. Miba/Monk #895. Edition: 100

Konigsbrunner Edel-Pils (DR) released 1996. Marklin #8661.013. Miba/Monk #1009.

Konigsbrau OGGENHAUSEN (Wurttemberg) released 1996. Marklin #8661.025. Miba/Monk #1025.

Zotler Bier-Rettenberg (Augsburg) released 1999. Marklin #8661.051. Miba/Monk #1213. Edition: 100

Engelbrau RETTENBERG (Augsburg) released 1999. Marklin #8661.053. Miba/Monk #1249. Edition: 100

Nattheimer Ochsenbrau (Wurttemberg) released 1999. Marklin #8661.054. Miba/Monk #1246. Edition: 100

Brauerei Stolz Isny (Wurttemberg) released 1999. Marklin #8661.056. Miba/Monk #1248. Edition: 100

Memminger Burger&Engelbrau (Augsburg) released 1999. Marklin #8661.057. Miba/Monk #1250. Edition 100

Bell Basel (SBB CFF) released 2003. Marklin #8661.909. Miba/Monk #1586. Note: originally sold in Switzerland

Hasen Brau Augsburg Aktienbrauerei Zum Hasen ZFI (DR) released 2013. Marklin #8661.081. Miba/Monk #1723. Edition: 150

 

Siding: those new to this blog will find other box cars in this category under section Marklin Special Imprints: 8661.

Marklin: 88185 K.W.St.E. express locomotive

Marklin’s newly released 88185 class ‘C’ express locomotive of the Royal Wurttemberg State Railways features Era I paint scheme from 1915. The model features improved detailing and motor compared with the earlier version and includes improved side rod details and brushless motor.

The 88185’s cab has been the location of the backside of motor in the early release as well as this one, but the large brushless motor significantly protrudes through the cab of the 88185 thus maybe be seen as a less successful release in recent memory of Marklin Z steam locomotives featuring the new style motor. As for running and performance this locomotive runs very well with smooth acceleration and deceleration even at slow speeds.

An elegant steam locomotive with early streamlining characteristics including wind splitter cab.

Era I around 1910-1915 is as early as Marklin has gone thus far in the mini-club line-up – having one of the Wurttemberg locomotives is essential equipment for pulling Marklin’s wonderful coaches for this railway including: 87940 (2001/2002), 87950 (2001/2002), and 87960 (2001/2002). But the soon to be released Wurttemberg coach set 87009 is another option featuring for the first time interior details and gas tank installed on undercarriage of the class Di Wu 04  and Ci Wu 05 open platform coaches.

Marklin 87009

Maybe a future release of an Era I baggage coach and mail car will be a possibility.

Railex’s (Germany) models in Z gauge include Wurttemberg coaches from the 19th century made of brass and released a number of years ago with designation “Wurttemberger Zug – Set 1”:

Siding: Railex models in Z include coaches, freight cars, and locomotives with a primary focus on early 19th century German trains. Locomotives although very finely detailed and handcrafted lack their own power, ghost cars are generally used to propel the trains with motors hidden in coaches. Railex models are unique in Z having released many limited models exclusively in metal of prototypes not generally touched on by other manufacturers.

Siding: K.W.St.E. is the abbreviation for Koniglich Wurttembergischen Staats-Eisenbahnen with English designation Royal Wurttemberg State Railways.

 

Grand Ducal Baden State Railways P8 Locomotive: Marklin 88999

Another version of the P8 steam locomotive was released by Marklin in the colorful 88999 for Bad. Stsb. (Grand Ducal Baden State Railways). The model was announced in 2009 in bright Prussian Blue paint scheme with hand painted brass boiler bands, it features a five pole motor and cast metal construction thus providing the weight and ballast for excellent pulling capacity. The P8 in Era I for Bad.Stsb. did not have smoke deflectors installed as with later Era locomotives in this class thus they are not present on this model.

The prototype was built in the years 1906-1923 for a total production of more than 3000, it would prove to be a hugely successful locomotive in service in some cases as long as 5 decades. Prewar P8’s were coupled with small capacity tenders whereby post war P8’s were coupled with tub style tenders authentically modeled by Marklin in other mini-club locos of this class.

The running performance of all versions of mini-club P8’s is outstanding even at low speeds.

Siding: numerous versions of the P8 exist in the mini-club line up including trainsets, it was even updated with improved side rods, but it still uses the proven 5 pole motor with traditional brushes and armature: brushless motors maybe on the horizon for future versions of the P8, but I hesitate to wholly endorse this improvement.

New Propulsion: Marklin’s foray into brushless motors

This isn’t the first, and it won’t be last post commenting on the new motors for Marklin Z. With progress comes nervousness and apprehension about the future, and the new Marklin motors for Z are one such progression.

Oiling the wheel sets and keeping the wheels clean is all that is required for maintaining these new motors and locos. The new generation of Marklin Z includes numerous new item releases, re-tooling of older designs, greater detail of running gears, pantograph screws moved to the inside of electric locos, and new propulsion. In some cases the new propulsion replaces 3 and 5 pole motors used in older well known locos, and other newly tooled locos are designed with the new motor types. Brushless motors have been used by numerous manufacturers of Z with excellent results including FR, Z-Modellbau and Archistories.

My open question: Should Marklin start using this new technology? On the one hand the 5 pole was a very positive replacement for the 3 pole: quieter with smoother running performance, but the brushless motors are supposed to be even more quiet and smoother with lower idling speeds. There is more maintenance with the 3 and 5 pole including replacing brushes and unlocking transmission and running gears when oil hardens from prolonged storage. Everything seems to support this new advancement, but for some maybe not. The traditional motor is strong and durable winning the Guinness World Record for continuous running: 1219 hours in 1978. If it isn’t broke why fix it? Which takes me to the impetus for this post and my personal experience with the new steam loco 88974 featuring the new motor. Inexplicably this loco stops dead in its tracks on a clean oval test track after running well for a few minutes, it will resume running in the opposite direction before returning to running forward until it stops again. Problem solving with the traditional motor is easy with the new one it is more elusive. Possibly more precision is required to align the new motor and gearing owing to the precision hand assembly at FR and Z-Modellbau and their mastery with this new type of motor? Collectors of Marklin Z are in the early stages of acquiring Marklin locos with the new motor and maybe this is simply the “learning curve” phase.

Side by side comparison of the same class loco (new and old) shows the adaptation of the new motor in an older mini-club loco type. Locomotive Serie 231 Pacific lettered for SNCF from Orient Express set 8108 (1988-1997 released with 3 pole motor which can upgrade to 5 pole) photo: top shelf and Class S 3/6 lettered for K.Bay.Sts.B (One Time Series 2015 New Releases with current brushless 5 pole motor) photo: bottom shelf.

Note: larger physical presence of new motor extending outside the cab than the older brush motor.

Siding: Google brushless motors for detailed description versus brush motors and share your insights with me, I would enjoy adding to my understanding and education with this new technology. Cheers to Marklin for the continuing evolution of Z gauge.

 

German P8 and BR 38 Steam Locomotives

Photo: Former Prussian P8 given as war reparation to SNCF following WWI.

Marklin reached back into German railroading history and realized the legendary P8 and BR 38 in ‘Z’. Note: before unification it was the P8 and after unification it was BR 38. In the Marklin line-up there are plenty of variations of the P8 and 38 steam locomotives but the tooling remained the same until the side rods and brake equipment were upgraded with the 2013 release of 88998.

So what about the history of this 4-6-0 locomotive? Nearly 4000 examples were manufactured for 18 years starting in 1908. Retirement came in 1974 after a 50 year career with 627 having been given to other countries as war reparations following WWI. Its top speed of 110km/hr was suitable for passenger trains, but it was a reliable goods train also. In my research the top speed of 110km/hr was never fully achieved in the Prussian examples due to poor running performance of the Prussian ‘box’ style tenders instead it would seem that 100km/hr was the top speed in the early years. It is noted that larger tenders were not used by KPEV due to the burdens of turning a longer loco and tender on turntables of the time. Eventually the DB fitted war time ‘tub’ style tenders to this locomotive class after WWII.

8899 is the first BR 38 produced in mini-club, 1982 to be exact. This Era III BR 38 for the DB featured the original Prussian ‘box’ style tender and 3 pole motor, it was produced until 1995. The large smoke deflectors would eventually be replaced with smaller ‘Witte’ deflectors.

88991 (photo) is virtually identical to 8899 with two notable exceptions: 5 pole motor and post-war ‘tub’ style tender. This locomotive was produced from 1998 until 2003.

The P8 painted and lettered for KPEV (Royal Prussian Railroad Administration) as a One Time Series was 88994 (photo). Released in 2006 as part of the MHI program the 88994 represents an Era I P8 with original Prussian ‘box’ style tender. KPEV locos in the Marklin line-up are heavily detailed with distinctive paint scheme, they can go with passenger or freight cars, or both.

Jumping ahead to the new era at Marklin is the 88998 (photo) BR 38 for DB. An Era III steam locomotive featuring Marklin new design concept that includes lively side rod action and detailing including well conceived brake equipment details. The movement of the side rods on this loco are elegant! Note the correct style tender for Era III and ‘Witte’ smoke deflectors. First retooling since 1982!

Rolling back the clock to 2009 is the 88999 (photo) P8 for Gr.Bad.Sts.E. (Grand Ducal Baden State Railways). This Era I locomotive was in the Marklin mini-club line-up from 2009-2014. Original Prussian box style tender and 5 pole motor. Paint and lettering in Prussian Blue with boiler straps painted to highlight the prototypes original brass ones. Note: no smoke deflector was incorporated in the early design of the P8, other design changes would happen over time including two types of smoke deflectors and tub style WWII welded tender.

Marklin’s first release of a P8 in a train set was 8130 from 1989 – 1992, the 8128 (photo) included an Era I KPEV loco and tender paired with four freight cars.

The Marklin 81420 (photo) Grand Ducal Baden State Railways train set from 2000 – 2002 included a Gr.Bad.Sts.E P8 in striking Prussian Blue paint scheme detailed with brass boiler straps, it was boxed with a 2nd class and a 3rd class coach as well as a privately owned Swiss tank car and beer car with brakeman’s cabin. Locomotive is equipped with Marklin 5 pole motor.

The 2002 One Time Release of “Sylt Auto Travel Train” 81428 (photo) was another example of a train set with mixed rolling stock, freight and passenger coaches comprising the consist. This train set from Era III included a DB BR 38 with ‘tub’ style tender, 2- coaches lettered for “Hamburg – Altona, Husum – Niebull, Westerland plus 4 low side cars with autos, camping trailers and vans as loads. An interesting train set for vacationers traveling to camping destinations, this train removed the inconvenience of driving a camping rig to the vacation spot thereby delivering rested passengers at the start of their leisure vacations. Note: first time Witte smoke deflectors used on this ‘Z’ loco type.

The Era II “Ruhr-Schnellverkehr” (Ruhr Express Service) train set 81437 (photo) was released in 2005, it was produced until 2008, but it is unlikely many were produced through this period owing to the rarity of this set. The BR 38 locomotive was joined in the set with three coaches of Prussian design: 2- 3rd class coaches with and without brakeman’s cab, and 1- 2nd/3rd class coach with brakeman’s cab (notice the colorful paint scheme on center compartments denoting 2nd class). Please take note of the Prussian design compartments each accessed by exterior doors, in express coaches of this design passengers had little time to find their compartment and climb in, less than a minute is all you were given! The Marklin coaches in this set are stunning, they are full of detail including full length running boards and decorated brass hardware. The locomotive (photo 2) also featured destination boards: Ruhr – Schnellverkehr.

Siding: to describe the brilliant running performance of this loco type in ‘Z’ as anything less than superlative would be a mistake. If you are new to collecting Marklin Z steam this loco type in any example is highly recommended: perfection on the rails!

 

Archistories: Interlocking Towers Kallental and Dorpede

Sitting along side this 1915 “Achilles”  Marklin 1 Gauge live steam engine are two new releases by Archistories: Kallental and Dorpede “Interlocking Towers.”

Both buildings follow the same architectural design but vary in material construction, one is brick and the other is open timber. A throwback to a time in railroad history when signals and switch turnouts were controlled mechanically by an operator. Today these structures have largely disappeared with the advent of electric controls: push buttons replacing throw levers.

Which one you choose is a matter of personal preference, but each reflects distinct styles of German industrial architecture. Cut-outs are incorporated into the buildings for accessory lighting along with partition walls to control light flow. Additional features that are new to Archistories kits that I have assembled are scored boards for continuously folded frameworks walls, open timber and even ornamental brickwork. Working with long parts that fold is assisted by very light scoring along those lines that have already been etched by the laser. Archistories kits are nothing like all the other ones on the market by other manufacturers, Archistories can be described as kits combining the highest quality materials, precision and design. Here you will find beautiful roof sheathing that is attached to solid underlayment, parts that actually fit together perfectly, and highly detailed window frames. Crisp detailing throughout inspire one to sit and marvel at the finished projects.

If you are new to building laser cut with numerous small parts and parts with filigree I would suggest a couple of practice runs applying glue to thin strands of scrap material before jumping in and gluing the open timber framework on the Kallental Signal Tower. The simple rule to follow is to place drops of glue instead of streams of glue in modest amounts and in discreet places. Not much glue is needed after all, parts in these kits are warp free allowing much less glue than other manufacturer’s buildings. Warp free high grade materials characterize Architories kits.

For those on the fence about laser cut I have a simple experiment: 1. Buy one of these kits and assemble it 2. take the finished building along with an assembled plastic building to a real life industrial complex preferably from the turn of the century and abundant in the United States 3. hold both kits alongside real life industrial brick architecture 4. ask yourself which looks closer to real life? I am confident the answer will be Archistories buildings every time.

Building a scene which incorporates these buildings are perfectly illustrated by Archistories company photographs. These dioramas incorporate cast rock formations, static grass of varying lengths and color, shrubs and trees placed as one would see along a railroad siding, track ballasting representing the region modeled and of course the painted or photographically illustrated background. Viewing the scene at eye level brings it all together and the backdrop brings it all together.

Photo used by permission (copyright: Archistories)

Siding: weathering can be added to Archistories buildings, I recommend the dry brush technique. Care should be taken to ensure good results, please keep in mind the high absorbent nature of these materials, it is better to start with a very dry brush and build up layers, too much paint and the building will be ruined. Or don’t weather at all!

Locomotive Builder Department: Werdau 1916

More than 30 locomotive laborers, bosses and owners stand and sit proudly before a stoked new engine with various tools and parts displayed in 1916 at a locomotive works in Werdau, Germany.

A wide range of ages are also on display as this firm employed men presumably from the prior century with vast knowledge and experience, in the new century this firm also employed two women.

Each person depicted was probably confident that their job would last a lifetime and history recorded this as fact; steam had a solid 60 plus years left. Skilled labor that could not be outsourced, downsized or outmoded; our contemporary culture cannot grasp the life these men and two women experienced, as members of society they shared in the transport of people and goods by growing (my Wife prefers “building”) these powerful locomotives that lived beyond many in this photograph. A specialist is required to identify the tools and parts, but some stand out including calipers and wrenches (supersized).

In a future post I will be consulting with such a specialist to help identify these parts as well as the most unusual steam loco design. And perhaps I will also be able to uncover another photo of the locomotive in its entirety so stay tuned.

For now we will enjoy the people watching and take note of the clogs.

If anyone has anything to share on this photo please feel free to comment, I will give you credit and add to the description.