Category Archives: Passenger Coaches in Z

FR’s 1960 Talsvagen coach sets: 46.220.32 + 46.221.32

Furthering FR’s offering of 1960 Talsvagen coaches for SJ include the recent releases of 2 car sets: 46.220.32 includes 1- 1st class coach + 1- 2nd class coach and 46.221.32 includes 2- 2nd class coaches.

46.220.32

46.221.32

Painted and lettered for SJ following the paint scheme of the early 90’s these coaches also include the new logo: modern take on the winged logo dating back to the late 19th century which originally featured a railway wheel with chamfer and wings as seen here in a very early hat badge alongside a 1950’s updated hat badge:

Elegant bright colors exemplify modern SJ paint schemes following the originating paint scheme of red/brown with a simple boxed in SJ logo branding the 1st examples of 1960 Talsvagens.

A custom light panel comprising LED’s designed and manufactured by Passmann is available as an accessory on the FR website. Installation is not hard with the right tools including soldering iron, tweezers, magnifying goggles, and tool (Bug bending tool) for precision bending wheel wiper whiskers for electrical pick-up.

Note: Harald Freudenreich can deliver the coaches with bogies and roof panel removed to make installation of the light panel easier versus disassembling the coaches for the upgrade.

Siding: Bug bending tool is an indispensable tool for etched metal build kits, I haven’t found anything quite like it and I would highly recommend this item for every Z gauger’s tool box.

 

Lighting Unit for SJ Talsvagn: FR accessory upgrade

Scandinavian railroads are almost exclusively represented in Z by Freudenreich Feinwerktechnik (FR) which also includes Swiss and German prototypes. And less frequently PKP (Poland) and FS (Italy). Almost a year ago after many years in the plan and design stage the 1960 Talsvagn coach was released by FR in its first version with 2 “two car” sets with 1990’s paint scheme (blue with red stripe). Since this release there has been 6 more releases with early brown paint scheme (1960’s-90) and current NetRail paint scheme. Built into the design of each 1960 Talsvagn coach is the ability to retrofit a custom light panel manufactured in Germany by Passmann (Unna, Germany) and sold by FR as an accessory for this coach type. First a list of Talsvagn coaches thus far released.

FR’s releases are sometimes limited to a stated number while others are open editions, but all FR items should be considered rare as each is produced in small batches. The following is a list of 1960 Talsvagn coaches thus far:

46.220.02: open release (available to order)

46.220.12: open release (available to order)

46.220.42: limited to 25 total

46.220.52: limited to 25 total

46.221.02: open release (available to order)

46.221.11: open release (available to order)

46.221.42: limited to 25 total

46.221.52: limited to 25 total

Accessory lighting panel FR article #FR-TV #PA-512 is an LED light panel designed specifically for the 1960 Talsvagn coach, it is a flicker free lighting panel comprised of numerous LED’s which evenly illuminate in realistic terms. It is another outstanding accessory available from FR. Installation is easy (3/5) for those that have decent soldering skills. Instructions are included but lack English text which is not an issue at all because there are nearly 20 very good photographic illustrations.

I have a few notes to add to the included instructions that might be helpful for others retrofitting their coaches:

1. wheel sets pick-up the electricity from the track to power the light panel, each truck is connected with a wire to soldering points at each end of LED circuit board, insulated wheels should be located to one side of truck and this orientation should be carried out in the opposite position for other truck thus each truck’s pair of insulated wheel sets connect with different rails

2. whisker pick-ups should be carefully bent at 30 degree angle, 1.3mm brass bolt (kit includes 2) secures brass electrical pick-up to truck (FR accessory socket wrench 46.221.91 is designed for this bolt size), carefully reinstall wheel sets in aforementioned orientation. NOTE: before screwing bolt in place double check the pre-drilled hole goes all the way through truck housing otherwise the bolt will snap off!!!!!

3. one wire is included which should be cut in half or cut to length, before proceeding tin each end of wire (use of a little water soluble flux is advised), solder end of each wire to bolt protruding from truck with a little flux (touching soldering iron to bolt is better than wire to prevent melting of insulation (solder follows heat thus it is advisable to touch the thing you want to solder versus the wire, tinning the wire expedites the joining making it faster and easier)

4. reattach trucks into chassis with wire through pre-drilled hole, solder wires to solder points on circuit board, test LED panel before affixing to roof! Note: before soldering check orientation of circuit board with interior detailing, capacitors should fit snugly within compartment at end of car

5. roof attaches to circuit board with preinstalled double stick tape, but before installing double check middle clip on roof aligns with panel between window panes versus window otherwise the clip will be seen through the window and it will look terrible. Note: if a mistake is made with roof misalignment after LED panel is installed it will be very difficult to correct so double check/double check!!!! before gluing LED panel to roof!

Special Note: FR’s accessory light panel for the 1960 Talsvagn is easy to install with excellent instructions provided in a step by step format. Please do not deviate from the step by step instructions: all soldering should be quick and take place away from contact with plastic parts that melt thus do not install circuit board to roof panel before soldering wires to circuit board. And do not attempt to solder wire onto truck’s bolt after truck is reinstalled in coach body. All soldering takes place when trucks are separated from coach and circuit board is unattached to roof panel. Tinning wire before soldering makes things a lot easier as it allows for the wire to instantly grab the thing being soldered with minimal heat exchange.

 

 

NetRail: FR’s 2nd set of coaches 46.221.52

If you like rare things FR’s handmade precision models in Z are true to form; limited in number each item is historically accurate, and the current program is based on European prototypes with a heavy focus on Scandinavian railways.

More than a year ago FR started releasing their first ever ground up design and production of SJ coaches of type 1960-talsvagn. This is the 2nd set to complete the NetRail coach set thus comprising a 4 coach train set lettered for NetRail and VEOLIA Transport, Sweden.

Coaches feature interior detailing and interior lighting can be added as an accessory. The LED lighting kits are available as item #46.220.91 directly from FR’s website. USA buyers after log-in will see prices displayed in dollars without added 19%VAT.

The stated limited release of the two NetRail sets is 25 thus making these coaches instantly rare.

NetRail coach sets 1 and 2: 46.220.52 + 46.221.52. *limited numbers still available directly from FR.

Siding: Prototypical train set to pull NetRail coaches is the HECTOR RAIL class 143 locomotive (former SJ RC3) offered by FR with item #46.130.41:

FR continues to release new coaches in Z for SJ!

Two coach sets painted and lettered for SJ are now available from FR, and they include matching sets in the paint scheme for 1960’s thru 1990 thus the paint scheme is brown. FR’s modeling of these coaches includes interior detailing and trucks pre-drilled for accessory lighting.

46.220.02- 1960-talsvagn brun A+B two car set: 1- A2 5138, 1st class and 1- B5FRT 4945, 2nd class.

46.221.02- 1960-talsvagn brun B+B two car set: 1-Bo5 4752, 2nd class and 1- Bo5 4774, 2nd class.

Siding: 3 additional SJ coaches are available from FR painted and lettered for commuter traffic: 46.220.12 + 46.221.11.

FR Week: NetRail coaches 46.220.52

The recent release of FR’s NetRail coach set was released on a very limited quantity of 25 sets total. Once a week look at FR’s website because some items like this are fleeting and sell out fast.

Continuing with another coach set of FR’s design and manufacturing is this third one for the firm NetRail. Paint scheme is very dark blue and cool white with silver roof. No class designation.

NetRail founded in the mid 1990’s sells and leases railway equipment that they maintain and refurbish.

Prototype: 1960-talsvagn

Siding: FR has proposed future releases of this car type with various paint schemes.

FR Week: Interregio coaches 46.220.42 + 46.221.42

Several firsts with the recent release of FR’s SJ coach sets, they are the first coaches designed and manufactured by FR, and they are the first SJ coaches modeled for Z gauge. Plus these sets include interior detailing first introduced by Z-Bahn a number of years ago, now it is a feature of new releases by Marklin and FR this being an example.

The two coaches set follow the attractive paint scheme blue with red stripe. Any paint scheme for the RC2 and 3 locos can prototypically pull these cars, it is up to preference. The coaches feature fine detailing and prototypically depicted metal window frames.

46.220.42 includes 1- each 1st class and 2nd class type 1960- talsvagn Interregio A+B

46.221.42 includes 1 2nd class and 1- 1st/2nd class type 1960- talsvagn Interregio A/B + B

Note: yellow stripe indicates 1st class and turquoise represents 2nd class.

The model has a unique solution for the car weights, it is seated on the undercarriage and features fine detailing in cast metal. Car sets are delivered without interior lighting, but lighting can be added and FR has provided pre-drilled holes in the trucks to allow for wiring.

Siding: several paint schemes have been proposed for later releases, they will represent various time-frames in SJ passenger travel.