German P8 and BR 38 Steam Locomotives

Photo: Former Prussian P8 given as war reparation to SNCF following WWI.

Marklin reached back into German railroading history and realized the legendary P8 and BR 38 in ‘Z’. Note: before unification it was the P8 and after unification it was BR 38. In the Marklin line-up there are plenty of variations of the P8 and 38 steam locomotives but the tooling remained the same until the side rods and brake equipment were upgraded with the 2013 release of 88998.

So what about the history of this 4-6-0 locomotive? Nearly 4000 examples were manufactured for 18 years starting in 1908. Retirement came in 1974 after a 50 year career with 627 having been given to other countries as war reparations following WWI. Its top speed of 110km/hr was suitable for passenger trains, but it was a reliable goods train also. In my research the top speed of 110km/hr was never fully achieved in the Prussian examples due to poor running performance of the Prussian ‘box’ style tenders instead it would seem that 100km/hr was the top speed in the early years. It is noted that larger tenders were not used by KPEV due to the burdens of turning a longer loco and tender on turntables of the time. Eventually the DB fitted war time ‘tub’ style tenders to this locomotive class after WWII.

8899 is the first BR 38 produced in mini-club, 1982 to be exact. This Era III BR 38 for the DB featured the original Prussian ‘box’ style tender and 3 pole motor, it was produced until 1995. The large smoke deflectors would eventually be replaced with smaller ‘Witte’ deflectors.

88991 (photo) is virtually identical to 8899 with two notable exceptions: 5 pole motor and post-war ‘tub’ style tender. This locomotive was produced from 1998 until 2003.

The P8 painted and lettered for KPEV (Royal Prussian Railroad Administration) as a One Time Series was 88994 (photo). Released in 2006 as part of the MHI program the 88994 represents an Era I P8 with original Prussian ‘box’ style tender. KPEV locos in the Marklin line-up are heavily detailed with distinctive paint scheme, they can go with passenger or freight cars, or both.

Jumping ahead to the new era at Marklin is the 88998 (photo) BR 38 for DB. An Era III steam locomotive featuring Marklin new design concept that includes lively side rod action and detailing including well conceived brake equipment details. The movement of the side rods on this loco are elegant! Note the correct style tender for Era III and ‘Witte’ smoke deflectors. First retooling since 1982!

Rolling back the clock to 2009 is the 88999 (photo) P8 for Gr.Bad.Sts.E. (Grand Ducal Baden State Railways). This Era I locomotive was in the Marklin mini-club line-up from 2009-2014. Original Prussian box style tender and 5 pole motor. Paint and lettering in Prussian Blue with boiler straps painted to highlight the prototypes original brass ones. Note: no smoke deflector was incorporated in the early design of the P8, other design changes would happen over time including two types of smoke deflectors and tub style WWII welded tender.

Marklin’s first release of a P8 in a train set was 8130 from 1989 – 1992, the 8128 (photo) included an Era I KPEV loco and tender paired with four freight cars.

The Marklin 81420 (photo) Grand Ducal Baden State Railways train set from 2000 – 2002 included a Gr.Bad.Sts.E P8 in striking Prussian Blue paint scheme detailed with brass boiler straps, it was boxed with a 2nd class and a 3rd class coach as well as a privately owned Swiss tank car and beer car with brakeman’s cabin. Locomotive is equipped with Marklin 5 pole motor.

The 2002 One Time Release of “Sylt Auto Travel Train” 81428 (photo) was another example of a train set with mixed rolling stock, freight and passenger coaches comprising the consist. This train set from Era III included a DB BR 38 with ‘tub’ style tender, 2- coaches lettered for “Hamburg – Altona, Husum – Niebull, Westerland plus 4 low side cars with autos, camping trailers and vans as loads. An interesting train set for vacationers traveling to camping destinations, this train removed the inconvenience of driving a camping rig to the vacation spot thereby delivering rested passengers at the start of their leisure vacations. Note: first time Witte smoke deflectors used on this ‘Z’ loco type.

The Era II “Ruhr-Schnellverkehr” (Ruhr Express Service) train set 81437 (photo) was released in 2005, it was produced until 2008, but it is unlikely many were produced through this period owing to the rarity of this set. The BR 38 locomotive was joined in the set with three coaches of Prussian design: 2- 3rd class coaches with and without brakeman’s cab, and 1- 2nd/3rd class coach with brakeman’s cab (notice the colorful paint scheme on center compartments denoting 2nd class). Please take note of the Prussian design compartments each accessed by exterior doors, in express coaches of this design passengers had little time to find their compartment and climb in, less than a minute is all you were given! The Marklin coaches in this set are stunning, they are full of detail including full length running boards and decorated brass hardware. The locomotive (photo 2) also featured destination boards: Ruhr – Schnellverkehr.

Siding: to describe the brilliant running performance of this loco type in ‘Z’ as anything less than superlative would be a mistake. If you are new to collecting Marklin Z steam this loco type in any example is highly recommended: perfection on the rails!

 

Marklin 81001: “Leig-Einheit” Train Set

If you happen to own the Z Collection Book from 2015 you may notice this train set cataloged as DB, it is actually an Era II DRG train set. I have poured over this book which is a useful aid in researching Marklin Z and this is the first typo I have noticed.

Produced in 2011 – 2013 this train set included two pairs of GII “Leig-Einhart” Dresden box cars permanently coupled together. Coupled to a class 86 tank locomotive this lightweight train as it is referred formed a goods train in Era II, its development followed the need to procure lightweight trains for fast freight service with speed approved to 100 km/hour. This trainset would last until 1978.

The locomotive at the head of this train is the BR 86 tank locomotive as can be seen in the photos the tanks run either side of the boiler, this design cleverly allowed for some preheating of the water tank at the same time adding stability to the locomotive operation, its limitation was only the amount of coal it could carry.

Fifteen years of production starting in 1928 yielded 775 total units for regional and branch line service. One of Germany’s longest serving steam locos the class 86 served variously throughout Germany for 60 years.

Marklin’s 81001 BR 86 locomotive is painted and lettered for Deutsche Reichsbahn-Gesellschaft (DRG), it features a 5 pole motor with 4 pairs of driving wheels and cast metal body with many detail features.

The 81001 train set is sold out at the factory but a recent search shows these to be available through various dealers.

Good luck and have fun!

Siding: an excellent resource for regular production Marklin Z is the 800 page catalog Collection Marklin Z, published by modellplan GbR, 2015. Its author Thomas Zeeb has provided the “go to guide” for collectors of Marklin Z. This number one source was included with the release of the 2015 Toy Fair loco: BR 111 with experimental paint scheme. The book and the loco were delivered in an attractive black box illustrated with its contents. Marklin item number for the set is 88422.

Weathering Laser Cut with Noch and Railroad Colors

Yesterday I put together the fine new building kit from Marklin: 89759 Girder Bridge. Railroaders know from experience that these rather common bridges get a lot of abuse and neglect from weather, wear and tear from daily heavy train traffic and delayed upkeep. To explore the idea of realism as it goes with these bridges I decided to add weathering to the one I just made.

One new product from Noch is a 2 part rust kit (61162) which incorporates an iron medium that is oxidized by the application of a second solution. The Noch product plus Railroad Colors “Tarnished Black” water based paint will be used in this weathering example.

Noch recommends prepping the surface to be rusted with a spray fixative. In the case of paper it is recommended by this modeler, without spray fixative the Noch Rust kit soaks into paper leaving little on the surface to later oxidize. Wet application of paints also leave little flexibility or control as they too will be soaked up in a laser cut building kit, layering of color will thus be difficult. What to do? I recommend a spray fixative which is applied by passing the building through a spray mist of Artists’ fixative rather than spraying the model directly. Too much spray fixative will darken the color of the model, it is also unnecessary. Your health will benefit from this small application and don’t forget a mask. As for applying paint I recommend the dry brush method which entails saturating a brush with paint and running both sides of the brush over a paper towel until little paint is seen on the paper towel thus allowing a very controlled randomized application. I use dry brush for all weathering techniques, it works to bring out surface engravings in laser cut better than the dab and smear approach with cotton balls recommended by one manufacturer or traditional painting. I also sometimes use paint directly with a small brush to push dirt into hard to reach crevices such as with this bridge.

Railroad bridges lack ornamentation, they are designed to be strong and functional. What a railroad bridge wears on its surface is dirty sticky grime, oil sprays, abrasions from ballast getting kicked up, soot and rust. For a well maintained bridge the rivet heads and plates will have some rust coating eventually while the rest of the bridge will be covered in years of weather and train wear and tear. How far you go with weathering is your choice but keep in mind a fresh painted bridge is rare in the real world. Plants sometimes find their way onto this bridge type along with birds nest and the like.

Photo: before weathering:

Photos: after weathering:

Note: Railroad Colors make oil and water base paints, I recommend the water base paints due to their dull flat appearance when dry.

Applying Noch Rust is easy, after prepping the surface the first step is applying iron from the large bottle. The manufacturer recommends 2 hours of dry time before the second step applying oxidation from the small bottle. Noch recommends a second application of spray fixative to stop the oxidizing process.

Try the dry brush method of applying paint after the rusting steps are completed. And that’s all you need to do.

Note: an assortment of brushes from small to big and flat to round is recommended. I also customize brushes including a cheap natural fiber house painting brush, I like these brushes because their fibers are of all lengths and rough thereby randomizing the application of paint with dry brush. I also cut these brushes to the width I want to work in this case the brush width corresponds to the width of the sides and base.

The number one dealer for innovative Noch products is zscalehobo.com.

Products used in this posting: Noch 61162, Railroad Colors “Tarnished Black” and Marklin 89759 Girder Bridge.

Good luck and have fun!

Siding: if boats travel under your bridge perhaps consider adding a warning light, warning stripes, or signage.

 

New Release: Marklin 89759 Steel Girder Bridge

With the new release of a steel girder bridge Marklin has further committed to finely detailed and textured laser cut kits in Z. For those who have been fortunate to discover Archistories kits this one is similarly packaged, but it is not an Archistories kit, the manufacturer of this kit is Modellbau Laffont who have produced other kits recently in the Marklin Z line-up.

For an easy introductory laser cut kit this is a good place to start, it will take about 1 – 2 hours to complete for those with a little experience perhaps longer if this is the first time completing such a kit. A fine OLFA razor knife is perfect, a pair of fine tweezers and common white glue although I prefer NOCH 61104 glue designed for this purpose.

The steel girder railroad bridge is common to all parts of the globe in one form or another because of its high strength and low cost. Usually older bridges are spotted with rust and the general rule is follow a maintenance schedule including repainting this type of bridge periodically to extend the life many years in the future. For a railroad layout a choice can be made to add weathering such as dirt, grime and rust which I will be following up with in a future post.

The bridge kit is loaded with detail including the heavy riveted plates joining angled beams, it also features a wood plank walkway with attached railing. The completed project is a well thought out heavy duty steel bridge that is rigid as a model too.

The cost of the bridge is reasonable, I bought mine for $16.00. Overall length is 4 1/4 inches and multiple bridges will be an eye catcher on a layout. Bridge supports will need to be fashioned with some type of masonry either brick or stone, these veneers are easily available, they are glued over cardboard or styrofoam. With its filigree base the light from your locos or coaches will reflect in the river below to spectacular effect.

Good luck and have fun!

Pilot Wheels: Legacy in Marklin Z

Marklin 88092 with two wheel leading truck.

With the invention of the steam locomotive in the 19th century came un-powered pilot wheels as part of its invention, they were meant to support the front end of the boiler and assist the locomotive negotiating curves. John Jervis is credited with the first locomotive design incorporating leading wheels or pilot wheels for his 1832 4-2-0 locomotive. It would be another 33 years until the design of leading wheels would be improved by William Adams, his 1865 design allowed the front bogie to slide slightly to negotiate curves and a spring mechanism to thus allow the bogie to reorient to center. A two wheel leading truck is referred to as a ‘pony’ truck, four and six wheel leading trucks are considered more stable than pony trucks for high speed service. As a point of clarification the pilot of a locomotive is located on the front of a locomotive to deflect any type obstruction which would otherwise derail the train, various designs were built into 19th and 20th century steam locomotives of a mostly filigree framework, later solid sheathing was incorporated in the streamlining of many diesel designs in the United States.

Marklin Z steam locomotives incorporate sliding lead wheel sets with a spring mechanism made of tension brass. Even in Z the leading wheels are important to running long steam locomotives successfully. It is another example of Marklin being true to the prototype even in the smallest scale.

I recently bought 88272 as ‘new dealer old stock’, it was released in the mid 2000’s as a One Time Series, it sat on a shelf for over 10 years with plenty of time for the oil to harden. I tested it at low voltage and it worked flawlessly without any hesitancy so I tried it on a large oval, the pilot wheels derailed on the first curve: hardened oil syndrome on the pilot truck pivot point as well as the trailing truck’s pivot point with no sign of hardened oil in the gearing of the driving wheels. Cleaning the loco of all the old oil and re-oiling solved the problem! Advantages with Marklin Z are the easy to diagnose and repair problems: always look for the easy answers.

After making the repair I compared the 88272 BR 42 with the 88273 BR 41 both are closely related with the same chassis and shell , leading wheels and trailing wheels on the 88273 do not include the tension brass mechanism supporting the axle on both trucks. If the slight tension created by the brass spring is too much the wheel set will deform below the surface of the driving wheels. Removing the brass tension mechanism if it is deformed or damaged is recommended, if it is left in this case derailments will ensue.

Since entering the community of Z I have been told by many that the two wheel leading truck on some Marklin Z steam locos cause derailments due to not enough weight on the front end of the locomotive, it has been advised that placing lead weights to the front end by soldering bb’s is the answer to fixing the apparent Marklin design flaw. We might all like to tinker, but as a long time collector of Marklin z gauge I found no evidence of design flaws in z by Marklin quite the opposite, I continue to marvel at locomotives and rolling stock designed for long term running characteristics which are easy to maintain and repair.

I collect Marklin mini-club as my primary railroading enterprise, but I also collect prewar Marklin 1 gauge and prewar Lionel Standard gauge. As a point of comparison I pulled out the motor and pilot wheels of my Lionel 384 from 1930. In the photos the itty bitty Marklin Z 88273 incorporates leading wheels that slide on their axle whereas the big Lionel loco restricts the leading wheels to pivot only on a vertical axis.

Photo: Lionel 384 pilot wheel and Marklin 88273: behemoth and the “Little Giant!”

Photo: Lionel 384 2-4-0 locomotive motor with driving wheels and leading wheels juxtaposed next to Marklin 88273 which incorporates a sliding axle not present in the 1930 Lionel.

I would say in closing that Marklin has already considered the leading trucks as important elements and not decoration in their design which accounts for historical accuracy and perfect operating characteristics, modification to the leading truck maybe overlooking the real problems which could be dirt or hardened oil around the pivot point or too much downward pressure from the brass tension spring. The same applies to the trailing truck. Always look for the easy answers instead of reinventing the wheel.

Good luck and have fun!

Siding: Gearing on Marklin Z gauge steam locomotives usually comprise driving wheels with connecting gears. Connecting gears are installed first followed by the driving wheels and side rods. It is a little tricky working with small parts, but the objective is to line up all of the wheel weights in correct orientation otherwise the loco will not run smoothly instead the gears will bind up. Tell those around you that you may need a 1/2 hour on your hobby or 6 hours when you make your first steam locomotive repair.

Siding: if that set of pilot wheels keeps derailing it will more than likely be dirt or hardened oil around the pivot point, pilot wheels should move freely around pivot point.

New Releases: Archistories “Signal Towers” + Marklin tank loco 88957

The perfect companion for Archistories buildings along the rails is Marklin and vice versa. Three new releases by these two companies plus one more Archistories will be the gist of this post.

Both companies of German origin go hand in hand, Archistories reaching back in time with their early Prussian design brick industrial buildings which service the railway and Marklin’s wide range of Era 2-6 locos and rolling stock. A new release by one of these companies builds on the tradition of what has been released thus far.

For Archistories two new signal towers one of brick and the other framework construction complement another interlocking tower with exposed timber released a few years back.

Variations in their kits include thus far have included framework versus brick as was the case with the mill building which can be seen here along side the new release signal tower of exposed timber/framework construction. Framework construction can be seen in Germany in a variety of uses including residential. Adding several different building types in exposed timber versus brick makes for a very interesting landscape.

Notice the mill propped by tweezers to level it out for the photo, the wheel extends below grade and it is serviced by a small motor provided in the kit. Simply soldering is required to attach two diodes in-line to the positive pole, wires thus descend below the structure and will thus be hidden from view after the building is planted in your layout’s landscape. The first step to making the mill is the wheel which is the more involved than the rest of the kit, but it is fun to start here knowing that by the end of the day that wheel will be turning wheat berry into flour for your town’s sustenance. The motor provided in the kit is shaped to perfectly conform to the buildings framework, but before proceeding you will want to confirm the motor is functioning properly just to be sure, it is highly unlikely to have a motor defect in an Archistories kit. The manufacturer suggested to me that a couple of more diodes can be installed to reduce the sound of the motor, I am a okay with the movement and sound, I don’t feel additional modification is warranted. Special Note: diodes should never be covered by electrical tape due to the potential of overheating, leave them naked so to speak!

Finding a home on the layout will require a mill race with partially dammed water to create pressure, one door is provided to the bridge that could provide access to a parking area for a truck or wagon. A Preiser figure or two will sure add scale and built into each Archistories kit are partition walls to carefully control light flow inside the mill.

If you have ever wondered what a signal tower looked like way back in the day Archistories has provided us with three examples including the two mentioned in this post. When signal towers had a purpose they housed throw levers made of brass that skilled operators would throw and pull to control semaphores and track switches. In the United States switch towers can be seen variously within large switch yards but the throw switches have been replaced with electronic push buttons. And for that matter modern control can be carried out miles away. Signal towers in the United States were so well built as was other rail infrastructure that many abandoned years ago still stand today.

Archistories has modeled their signal towers/interlocking towers with many throw levers, and they have provided large windows for good visibility, the name of the game is coordination and visibility, railways could not sustain frequent accidents or misaligned trains thus the operator of signals and switches provided a very important contribution to safe and efficient rail service.

Marklin’s new tank loco is a member of the elite new and improved steam loco design for Mini-club that includes partially new tooling including the active side rods whose movement is a lively and graceful dance, new tooling includes detailed running gear and brakes. To not mention the extensive and crisp painting and printing would be an oversight since the level of detail probably extends further than we can see, but it is reassuring that Marklin still goes further than we might require to bring the model closer to the prototype. This one being the KPEV class T12 tank locomotive with “Berlin” destination board and used in suburban traffic. Marklin 88957 is an MHI Exclusive, collectors will need to contact an MHI dealer to order this one. The Marklin Handlers Initiative constitutes those dealers who order everything Marklin produces thus guaranteeing availability of certain releases other dealers may not have access to. Having a relationship with an MHI dealer who also handles your Insider subscription will guarantee your collection grows with some of the rarer releases.

Recommended: Noch 61104 laser-cut adhesive features pin point accuracy when applying glue in small drops for laser-cut cardstock building construction: faster than applying glue with a pin or toothpick!

Good luck and happy railroading!

Happiness comes 1:220: Marklin 88010

Photos: Marklin 88010 “2012 Insider Model” class 01 express locomotive of the DB.

Reaching back a few years (very few years 2012) to the Insider Model of 2012 is the 88010 a superlative locomotive not only for German railroad history but also mini-club history. On its release mini-club collectors for the first time received an important German express locomotive modeled in 1:220 with detailed running gear and working side rods of an advanced state of design. “How did they do it? How could they do it?” were at least two of the questions that swirled in the ‘Z’ community. But then something truly remarkable happened Marklin advanced these design skills to each of the steam locomotive class in subsequent years. But wait they simultaneously applied the same design skills and inspiration to the diesel and electric locomotive classes. Long time collectors of Marklin Z could not have anticipated the advancements to this rarified hobby, but here we are on the other side of what many of us thought was impossible. What a great and lovely time to be part of the “mini-club” Club!

As the models come closer to the prototypes those reasons for not going ‘Z’ become evermore present: reality modeled in Marklin Z achieved at the smallest scale without compromising the prototype. Sure it is charming and fun to collect larger scales that are modeled to move freely on a layout with all the functions you would expect, but trains of other scales as we go up in size require sensitivity to length and size in order to work flawlessly with the radius curves, turnouts and special features. Z scalers appreciate those concerns are mere fodder for this scale, as such we enjoy unprecedented freedom to explore large layouts that might include multiple towns modeled with accurately represented trains in the same space a larger scale might only include a few buildings with an oval layout maybe on a 4’x8′ board. Z is limitless and the potential to build and design a large layout is not out of reach of most railroaders even those living in a small apartment in Manhattan: 1 foot of track length equals 220 feet of prototypical track length, at 6 feet we are approaching a 1/4 mile. Add a complete loop and a radius we are close to a mile. But many ‘Z’ers I have met over the years don’t limit their layout dimensions to the traditional 4×8, they have no rules. Taking over a room in a house might be a man cave to some but for others it is peace of mind for many wives and partners, but Marklin mini-club is not limited to men only it is a hobby enjoyed by women as well. What better way to spend a Saturday afternoon than reading a book on railroading, designing the ultimate layout, building a beautiful Archistories laser cut building, or cleaning and maintaining your layout and collection. The ultimate railroading experience is ‘Z’, this scale overtakes the senses as it has since 1972 and many of us ‘Z’ers are among the happiest people alive: cheers Marklin!

Siding: join the Insider Club with benefits that include the Marklin Magazin, Insider Magazine, free club car in the gauge of your choice and invitation to own Insider locos which often introduce new tooling!

 

Archistories: Interlocking Towers Kallental and Dorpede

Sitting along side this 1915 “Achilles”  Marklin 1 Gauge live steam engine are two new releases by Archistories: Kallental and Dorpede “Interlocking Towers.”

Both buildings follow the same architectural design but vary in material construction, one is brick and the other is open timber. A throwback to a time in railroad history when signals and switch turnouts were controlled mechanically by an operator. Today these structures have largely disappeared with the advent of electric controls: push buttons replacing throw levers.

Which one you choose is a matter of personal preference, but each reflects distinct styles of German industrial architecture. Cut-outs are incorporated into the buildings for accessory lighting along with partition walls to control light flow. Additional features that are new to Archistories kits that I have assembled are scored boards for continuously folded frameworks walls, open timber and even ornamental brickwork. Working with long parts that fold is assisted by very light scoring along those lines that have already been etched by the laser. Archistories kits are nothing like all the other ones on the market by other manufacturers, Archistories can be described as kits combining the highest quality materials, precision and design. Here you will find beautiful roof sheathing that is attached to solid underlayment, parts that actually fit together perfectly, and highly detailed window frames. Crisp detailing throughout inspire one to sit and marvel at the finished projects.

If you are new to building laser cut with numerous small parts and parts with filigree I would suggest a couple of practice runs applying glue to thin strands of scrap material before jumping in and gluing the open timber framework on the Kallental Signal Tower. The simple rule to follow is to place drops of glue instead of streams of glue in modest amounts and in discreet places. Not much glue is needed after all, parts in these kits are warp free allowing much less glue than other manufacturer’s buildings. Warp free high grade materials characterize Architories kits.

For those on the fence about laser cut I have a simple experiment: 1. Buy one of these kits and assemble it 2. take the finished building along with an assembled plastic building to a real life industrial complex preferably from the turn of the century and abundant in the United States 3. hold both kits alongside real life industrial brick architecture 4. ask yourself which looks closer to real life? I am confident the answer will be Archistories buildings every time.

Building a scene which incorporates these buildings are perfectly illustrated by Archistories company photographs. These dioramas incorporate cast rock formations, static grass of varying lengths and color, shrubs and trees placed as one would see along a railroad siding, track ballasting representing the region modeled and of course the painted or photographically illustrated background. Viewing the scene at eye level brings it all together and the backdrop brings it all together.

Photo used by permission (copyright: Archistories)

Siding: weathering can be added to Archistories buildings, I recommend the dry brush technique. Care should be taken to ensure good results, please keep in mind the high absorbent nature of these materials, it is better to start with a very dry brush and build up layers, too much paint and the building will be ruined. Or don’t weather at all!

Your wish has been granted: 2 new releases from Archistories!!!!

It has been too long since I have put together an Archistories building kit, and just the other day I was hoping for a new release; my wish was granted two-fold with the release of a signal tower in two versions: 1. 101161- Dorpeder/Moosbach brick construction variant one and 2. 102161- Kallental/Biberbach open timber variant two.

Archistories 101161

Archistories 102161

*Photos courtesy of Archistories.

If you have not assembled an Archistories kit let me tell you to get on board and put one of these kits together. Realism with fine detailing and historical accuracy are built into each kit. Plus the best build instructions of any building kit out there for ‘Z’. The novice who takes their time and enjoys the journey will produce a building so fine family and friends will take note that this hobby of your’s is serious business.

Archistories granted permission to use two of their company photographs in this post. The photographs illustrate how nicely these buildings can look in a railroad diorama whose design and construction is equivalent fun to running trains. And very satisfactory investment of time!

Laser cut fiber buildings are the next generation, this and other developments in ‘Z’ are getting scale model railroading closer and closer to the prototype.

I ordered both kits the other day from Z Scale Hobo, they should arrive any minute although my postman is on holiday so hopefully these minutes will not pass into hours. Can you tell I am anxious to start building these signal towers????

In the meantime as I continue to wait let me mention a few words about ZScaleHobo.com. Simply posting a link to this store would not be enough, in this day and age there are internet stores popping up all the time, but ZScaleHobo.com is not your typical online retailer of trains.

Here are some of the unique (not overstated) reasons to shop here: 1. enthusiastic specialist dealer/owner Frank      2. accurate inventory posted on the website      3. prompt shipping      4. variety of hard to find parts in stock     5. well rounded products by respected manufacturers including this one     6. best prices

You won’t find a better dealer of Z scale!

Here is a link to peruse the Archistories offerings at ZScaleHobo.com:

http://zscalehobo.com/archistories/archistories.html#Z-Scale

Time to go, I hear the postman. Question: which building should I start with?

Good luck and have fun!

 

SBB CFF FFS class Ce 6/8 III: Marklin’s new release 88563!

The iconic articulated Swiss loco “Krokodil” has long been associated with Marklin in all their scale models, but the new 88563 is a further development of this Era II loco in technological terms for ‘Z’ collectors following numerous releases of this loco in special editions and other variants since the first 8856 (green paint scheme) serie Be 6/8 in 1979 and the 8852 (brown paint scheme) serie Ce 6/8 in 1983.

For the first time changeover headlamps/trailing lamp in LED. Plus partially new tooling including the incorporation of catenary switch below the hood as it were and the removal of the roof top screw formally used to switch power on the circuit board from track to catenary. Removing the catenary screw from electric locos has been a continuing design function of the new locos just as improved running gear and side rods on the steam engines, it is a good time to get into the Marklin mini-club hobby!

Photo: 88563 (top chassis and bottom hood) and 8856.4 (green loco chassis and its hood showing hole through roof to support catenary screw)

A brief look under the hood between the new release and an older 8856 variant is a new circuit board supporting wires for the LED changeover lights thereby obscuring the motor, as can be seen in the photo the circuit board is solid and does not support engagement with brushes, this new motor is identified on the parts sheet as E279 138. Is this a new generation motor? A quick google search revealed nothing!?! When I have more time I will be taking this one apart and reporting what I find! Note: runs great out of the box!

Photo: Marklin 88563 (top) and 8856.4 (version 4: 2009-2010)

Note: switching to catenary power is achieved by carefully pushing the slider switch on the circuit board, in earlier versions this switch was a slotted head that extended through the roof of electric locos.

Follow-up: The new 88563 reveals a new generation motor! I couldn’t wait to find the time to conveniently take apart 88563 to reveal its workings so first thing this morning I opened it up. On first inspection of the circuit board I missed noticing the black and tan leads soldered to the circuit board which descend through holes in the board to the motor, which sits in a newly designed chassis. As with all 8856 variants the articulated locomotive design is comprised of three parts including mid section containing motor with two worm drives and front and rear driving wheel sets, in this new locomotive the mid section chassis is newly designed and dispenses with circuit board clips as well as any visual access to the motor. The circuit board is further redesigned in function but also appearance with two retaining screws and a much thinner board.

Future repair: Any future repairs to this locomotive will be difficult for any but the more advanced modeler. Due to its thin construction the circuit board will be prone to cracking and replacing the motor will be a skilled operation requiring un-soldering of points on the circuit board. How often are future repairs expected on Marklin Z in general? ZERO in my experience except for the cleaning of gears and motor upgrades of the traditional 3 pole/ 5 pole variety.

Closing: Thru advancements in technology and detailing closer to the prototype Marklin is producing some truly outstanding trains, but more intricate parts and complex wiring schemes could be seen as challenges to overcome on the workbench.

Siding: If you have an SBB Krokodil that runs rough perhaps after cleaning and reassembling it maybe due to the front and back side rods being out of alignment. If the loco runs well in one direction but rough in the other reassemble side rods so they are high on one end and low on the other.